Epson SureColor SC-T7700D Administrator's Manual page 98

Administrator's Guide
Combination of Local Address(Printer) and Remote Address(Host) on Group
Policy
Setting of Remote
IPv4
Address(Host)
IPv6
Blank
*1 : If IPsec is selected for Access Control, you cannot specify in a prefix length.
*2 : If IPsec is selected for Access Control, you can select a link-local address (fe80::) but group policy will be disabled.
*3 : Except IPv6 link local addresses.
References of Service Name on Group Policy
Note:
Unavailable services are displayed but cannot be selected.
Service Name Protocol type
Any –
ENPC UDP
SNMP UDP
LPR TCP
RAW (Port9100) TCP
IPP/IPPS TCP
WSD TCP
WS-Discovery UDP
FTP Data (Local) TCP
FTP Control TCP
(Local)
HTTP (Local) TCP
HTTPS (Local) TCP
Advanced Security Settings for Enterprise
*1
*1*2
Local port
number
–
3289
161
515
9100
631
Any port
3702
20
21
80
443
Setting of Local Address(Printer)
IPv4
IPv6
✓
–
✓
–
✓ ✓
Remote port
number
– All services
Any port Searching for a printer from
applications such as Epson Device
Admin, and the printer driver
Any port Acquiring and configuring of MIB from
applications such as Epson Device
Admin, and the printer driver
Any port Forwarding LPR data
Any port Forwarding RAW data
Any port Forwarding data of IPP/IPPS printing
5357 Controlling WSD
Any port Searching for a printer from WSD
Any port FTP server (forwarding data of FTP
printing)
Any port FTP server (controlling FTP printing)
Any port HTTP(S) server (forwarding data of
Web Config and WSD)
Any port
98
*2
Any addresses
✓
✓
✓
Features controlled
*3