Epson SureColor SC-T7700D Administrator's Manual page 30

Administrator's Guide
Note:
When you use the mail server on the Internet, confirm the setting information from the provider or website.
1. Access Web Config and select the Network tab > Email Server > Basic.
2. Enter a value for each item.
3. Select OK.
The settings you have selected are displayed.
Related Information
"Checking a Mail Server Connection" on page 31
&
"Mail Server Setting Items" on page 30
&
"Accessing Web Config" on page 24
&
"Logging on to the Printer Using Web Config" on page 48
&
Mail Server Setting Items
Items
Authentication Method
Authenticated Account
Authenticated Password
Sender's Email Address
SMTP Server Address
SMTP Server Port Number
Function Settings
Specify the authentication method for the printer to access the mail server.
Off
SMTP AUTH
POP before SMTP
If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated account name between 0 and 255 characters in ASCII (0x20-0x7E).
When you select SMTP AUTH, enter the SMTP server account. When you select POP before
SMTP, enter the POP3 server account.
If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the
authenticated password between 0 and 20 characters in ASCII (0x20-0x7E).
When you select SMTP AUTH, enter the authenticated account for the SMTP server. When
you select POP before SMTP, enter the authenticated account for the POP3 server.
Enter the sender's email address such as the email address of the system administrator. This
is used when authenticating, so enter a valid email address that is registered to the mail
server.
Enter between 0 and 255 characters in ASCII (0x20-0x7E) except for : ( ) < > [ ] ; ¥. A period ". "
cannot be the first character.
Enter between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN format.
Enter a number between 1 and 65535.
30
Settings and Explanation
Set when the mail server does not need authentication.
Authenticates on the SMTP server (outgoing mail server)
when sending the email. The mail server needs to support
SMTP authentication.
Authenticates on the POP3 server (receiving mail server)
before sending the email. When you select this item, set the
POP3 server.