Airprint Setup - Epson SureColor SC-T7700D Administrator's Manual

Administrator's Guide
❏ Upload and Print
❏ Print from Folder
1. Access Web Config and select the functions for which you want to set the default value for the Print tab > User
Default Settings.
2. Set each item.
3. Click OK.
If the combination of the value is invalid, it is automatically modified, and then a valid value is set.
Related Information
"Accessing Web Config" on page 24
&
"Logging on to the Printer Using Web Config" on page 48
&

AirPrint Setup

Set when using AirPrint printing.
Access Web Config and select the Network tab > AirPrint Setup.
Items
Bonjour Service Name
Bonjour Location
Geolocation
Latitude and Longitude (WGS84)
Top Priority Protocol
Wide-Area Bonjour
iBeacon Transmission
Enable AirPrint
Function Settings
Enter the Bonjour service name between 1 and 41 characters in ASCII (0x20-0x7E).
Enter location information such as the printer's placement within 127 bytes or less
in Unicode (UTF-8).
Enter the printer's location information. This entry is optional.
Enter values by using WGS-84 datum, which separates latitude and longitude with
a comma.
You can enter -90 to +90 for the latitude value, and -180 to +180 for the longitude
value. You can enter less than a decimal to the sixth place, and you can omit "+".
Select top priority protocol from IPP and Port9100.
Set whether or not to use Wide-Area Bonjour. If you use it, the printers must be
registered on the DNS server to be able to search the printer over the segment.
Select whether to enable or disable the iBeacon transmission function. When
enabled, you can search for the printer from iBeacon-enabled devices.
IPP, Bonjour, AirPrint are enabled, and IPP is established only with secure
communication.
37
Explanation