Epson SureColor SC-T7700D Administrator's Manual page 88

Administrator's Guide
RAW(Custom Port) Settings
Items
Allow RAW(Custom Port) Printing
Port Number
Printing Timeout (sec)
IPP Settings
Items
Enable IPP
Allow Non-secure Communication
Communication Timeout (sec)
URL(Network)
URL(Wi-Fi Direct)
Printer Name
Location
FTP Settings
Items
Enable FTP Server
Communication Timeout (sec)
SNMPv1/v2c Settings
Items
Enable SNMPv1/v2c
Access Authority
Community Name (Read Only)
Advanced Security Settings for Enterprise
Setting value and Description
Select to allow printing from the RAW port (custom port).
Enter the port number for RAW printing between 1024 and
65535 (except for 9100, 1865, 2968).
Enter the timeout value for RAW (custom port) printing be-
tween 0 to 3,600 seconds. If you do not want to timeout, en-
ter 0.
Setting value and Description
Select to enable IPP communication. Only printers that sup-
port IPP are displayed.
Select Allowed to allow the printer to communicate without
any security measures (IPP).
Enter the timeout value for IPP printing between 0 to 3,600
seconds.
Displays IPP URLs (http and https) when the printer is con-
nected to the network. The URL is a combined value of the
printer's IP address, Port number, and IPP printer name.
Displays IPP URLs (http and https) when the printer is con-
nected by Wi-Fi Direct. The URL is a combined value of the
printer's IP address, Port number, and IPP printer name.
Displays the IPP printer name.
Displays the IPP location.
Setting value and Description
Select to enable FTP printing. Only printers that support FTP
printing are displayed.
Enter the timeout value for FTP communication between 0
to 3,600 seconds. If you do not want to timeout, enter 0.
Setting value and Description
Select to enable SNMPv1/v2c.
Set the access authority when SNMPv1/v2c is enabled. Se-
lect Read Only or Read/Write.
Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
88