NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the stability foot. See
2. Remove both the left and right side-panels. See
3. If you have multiple graphics cards installed, remove the graphics card. See
Procedure
1. Lay the computer on the left side.
2. Disconnect the antenna cables from the wireless card.
3. Remove the screw that secures the wireless card to the chassis.
4. Slide and pull the wireless card away from the wireless-card slot.
84
Removing the wireless card
Removing the wireless card
computer. After working inside your computer, follow the instructions in
"Removing the Stability
Foot".
"Removing the Side
Panels".
"Removing the Graphics
47
After
www.dell.com/
Card".