Chapter 13: Removing The Wireless Card; Prerequisites; Procedure - Dell W19B001 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

Steps
1. Remove the stand.
2. Remove the back cover.
3. Remove the system-board

Procedure

Steps
1. Remove the two screws (M2x2.5) that secure the wireless-card shield to the system board.
2. Lift the wireless-card shield from the system board.
3. Remove the screw (M2x2.5) that secures the wireless-card bracket and the wireless card to the system board.
4. Slide the wireless-card bracket off the wireless card.
5. Disconnect the antenna cables from the wireless card.
6. Slide the wireless card out of the wireless-card slot.
24 Removing the wireless card
Removing the wireless card
computer. After working inside your computer, follow the instructions in
shield.
13
After
www.dell.com/