Chapter 21: Removing The I/O Board; Prerequisites; Procedure - Dell Alienware Area-51 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the stability foot.
2. Remove left and right side-panels. See
Procedure
1. Lay the chassis on the left side.
2. Disconnect all cables from the I/O board.
NOTE: Note the routing of all cables as you remove them so that you can route them correctly after you replace the
I/O board.
Removing the I/O board
computer. After working inside your computer, follow the instructions in
"Removing the side panels".
After
www.dell.com/
Removing the I/O board
21
41