Chapter 45: Removing The Coin-Cell Battery; Prerequisites; Procedure - Dell Alienware Area-51 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup program's settings to default. It is
recommended that you note the BIOS setup program's settings before removing the coin-cell battery.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the stability foot.
2. Remove the left and right side-panels. See
3. If you have multiple graphics cards installed, remove the graphics card. See
Procedure
1. Lay the chassis on the right side.
2. Push the coin-cell battery-release lever to remove the coin-cell battery.
Removing the coin-cell battery
computer. After working inside your computer, follow the instructions in
"Removing the side panels".
"Removing multiple graphics
Removing the coin-cell battery
45
After
www.dell.com/
cards".
81