Dell Alienware Area-51 Service Manual page 96

Advanced
USB Controller
HD Audio
Onboard LAN Controller
Pxe Option
Launch PXE OpROM
UEFI PXE Driver
PCIE GEN3
Power Management Setup
AC Recovery
Deep Sleep Control
Chipset
Spread Spectrum
CPU Base Clock (MHz)
Adjust CPU Base Clock Strap
Ring Ratio
DRAM Frequency
DRAM Timing Mode
CPU Ratio
CPU Ratio Mode
Overvoltage Configuration
Memory voltage (24h OUT1)
Memory voltage (26h OUT1)
DMI and Uncore voltage (2Ah OUT1)
CPU VCCIN
Advanced DRAM Configuration
Command Rate
tCL
tRCD
96 BIOS setup program
Allows you to enable or disable the integrated USB controller.
Default: Enabled.
Allows you to enable or disable the integrated audio controller.
Default: Enabled.
Allows you to enable or disable the onboard LAN controller.
Default: Enabled.
Allows you to enable or disable the boot option for legacy
network devices. Default: Disabled.
Allows you to enable or disable the PXE OpROM. Default:
Disabled.
Allows you to enable or disable the UEFI PXE Driver. Default:
Disabled.
Allows you to enable or disable the PCIE GEN3. Default:
Enabled.
Sets what action the computer takes when power is restored.
Default: Last State.
Allows you to define the controls when Deep Sleep is enabled.
Default: Enabled in S5 Only.
Enabling this option could reduce the EMI. Default:
Enabled.
Base clock for CPU. Default: 100.00.
Allows you to adjust the CPU Base Clock Strap. Default:
Auto.
Allows you to change the Ring Ratio mode. Default: Auto.
Allows you to adjust the DRAM frequency. Default: Auto.
Allows you to change the memory timing mode. Default:
Auto.
Allows you to adjust the CPU ratio. Default: Auto.
Allows you to change the CPU Ratio mode. Default:
Dynamic Mode.
Allows you to access the Overvoltage Configuration
submenu.
Adjusts the memory voltage. Default: 0.
Adjusts the memory voltage. Default: 0.
2Ah OUT1. Default: 0.
2Ah OUT2. Default: 1.8 V.
Allows you to change the Advance DRAM Configuration.
Default: Disabled.
Displays the Command Rate (editable in Manual Mode).
Displays the Column Address Strobe Latency (editable in
Manual Mode).
Displays timing of RAS to CAS delay (editable in Manual
Mode).