NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw holes on the battery case with the screw holes on the chassis.
2. Replace the two screws (#6-32x5.2) that secure the battery case to the chassis.
3. Connect the battery-case cable to the I/O board.
Post-requisites
1. Replace the battery.
2. Replace the right side-panel. See
3. Replace the
stability
foot.
26
Replacing the battery case
Replacing the battery case
computer. After working inside your computer, follow the instructions in
"Replacing the side
panels".
12
After
www.dell.com/