NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
Procedure
1. Tilt the computer towards the front until the base is facing up.
Figure 4. Tilt the computer
2. Remove the two screws (#6-32x6) that secure the stability foot to the computer.
3. Lift the stability foot off the computer.
Removing the stability foot
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Removing the stability foot
5
15