Chapter 19: Removing The Left Alienfx Side-Panel Connector; Prerequisites; Procedure - Dell Alienware Area-51 Service Manual

Removing the left AlienFX side-panel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the stability foot.
2. Remove the left and right side-panels. See
Procedure
1. Lay the chassis on the left side.
2. Disconnect the cable that connects the left AlienFX side-panel connector to the I/O board. See
computer. After working inside your computer, follow the instructions in
"Removing the side panels".
Removing the left AlienFX side-panel connector
19
connector
After
www.dell.com/
"I/O-board components".
37