Chapter 25: Removing The Memory Modules; Prerequisites; Procedure - Dell Alienware Area-51 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the stability foot.
2. Remove the left and right side-panels. See
Procedure
1. Lay the computer on the left side.
2. Locate the memory modules on the system board. For more information on the memory modules see
Components".
3. Push the securing clips away from the memory module.
4. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
NOTE: Repeat step 2 to step 3 to remove any other memory modules installed in your computer.
a. securing clips (2)
b. memory module
c. memory-module slot
Removing the memory modules
computer. After working inside your computer, follow the instructions in
"Removing the side panels".
www.dell.com/
"System-Board
Removing the memory modules
25
After
47