Chevrolet 2011 Corvette Coupe Owner's Manual page 71

Easy Exit Driver Seat
This feature can move the seat
rearward and the telescopic steering
column, if equipped, out of the way
to allow extra room to exit the
vehicle.
(Easy Exit Driver Seat): Press
to save and recall the easy exit seat
position.
To save into memory:
1. Recall the desired driving
position by pressing 1.
2. Adjust the seat and the
telescopic steering column to
the desired exit position.
3. Press and hold until
two beeps sound.
4. Repeat for a second driver
position using 2.
To recall, press and release
The vehicle must be in P (Park) for
an automatic transmission or the
parking brake must be set for a
manual transmission. A single beep
sounds. The seat and telescopic
steering column will move to the
position previously stored for the
identified driver.
If the easy exit seat feature is
programmed on in the vehicle
personalization menu, automatic
recall occurs when one of the
following conditions is met:
The vehicle is turned off, in
Retained Accessory
Power (RAP) or accessory
mode, and the driver door is
opened.
The vehicle is turned off, or in
RAP, and the unlock button on
the RKE transmitter is pressed.
Seats and Restraints
. If something has blocked the driver
seat while recalling the exit position,
the recall may stop. Remove the
obstruction; then press and hold
the power seat control rearward for
two seconds. Try recalling the exit
position again. If the exit position is
still not recalling, see your dealer for
service.
See Auto Exit Recall under Vehicle
Personalization on page 5 55 for
more information.
3-5