Chevrolet 2011 Corvette Coupe Owner's Manual page 207

Press to switch between
FM1, FM2, AM, XM1, or XM2.
Turn to select radio
stations.
Press to go to the
previous or to the next station and
stay there.
The radio only stops at stations with
a strong signal.
Press and hold
for two seconds until FREQUENCY
SCAN displays. The radio goes to
a station, plays for a few seconds,
then goes on to the next station.
Press or again to stop scanning.
To scan preset stations:
Press and hold
four seconds until PRESET SCAN
displays. The radio goes to the
next preset station, plays for a few
seconds, then goes to the next
preset station. Press
or press one of the pushbuttons to
stop scanning presets.
The radio only scans stations with
a strong signal.
or
Press to play stations that are
programmed to the radio preset
pushbuttons.
Drivers are encouraged to store
or for
radio station while the vehicle is
parked. See
stations using the presets, favorites
button, and steering wheel controls,
or again
if the vehicle has this feature.
Up to 30 stations (six FM1, six FM2,
and six AM, six XM1 and six XM2),
and equalization settings for each
station can be programmed on the
six numbered pushbuttons.
To set presets:
1. Tune to a radio station.
2. Press AUTO EQ to select the
3. Press and hold one of the six
4. Repeat the steps for each
. Tune to stored radio
equalization.
numbered pushbuttons until the
radio beeps once.
pushbutton.