Chevrolet 2011 Corvette Coupe Owner's Manual

Chevrolet 2011 corvette coupe automobile owner's manual

page of 436

/ 436
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

. . . . . . . . . . . . . . . . . . . . . . . . 1-1

Instrument Panel . . . . . . . . . . . . . . 1-2

Initial Drive Information . . . . . . . . 1-4

Vehicle Features . . . . . . . . . . . . . 1-16

Performance and

Maintenance . . . . . . . . . . . . . . . . 1-21

Keys and Locks . . . . . . . . . . . . . . . 2-2

Doors . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Vehicle Security. . . . . . . . . . . . . . 2-13

Exterior Mirrors . . . . . . . . . . . . . . . 2-16

Interior Mirrors . . . . . . . . . . . . . . . . 2-17

Windows . . . . . . . . . . . . . . . . . . . . . 2-18

Roof . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

. . . . . . . . . 3-1

Head Restraints . . . . . . . . . . . . . . . 3-2

Front Seats . . . . . . . . . . . . . . . . . . . . 3-2

Safety Belts . . . . . . . . . . . . . . . . . . . . 3-9

Airbag System . . . . . . . . . . . . . . . . 3-22

Child Restraints . . . . . . . . . . . . . . 3-37

. . . . . . . . . . . . . . . . . . . . . . . 4-1

Storage Compartments . . . . . . . . 4-1

Additional Storage Features . . . 4-2

Controls . . . . . . . . . . . . . . . . . . . . . . . 5-2

Warning Lights, Gauges, and

Indicators . . . . . . . . . . . . . . . . . . . . 5-8

Information Displays . . . . . . . . . . 5-25

Vehicle Messages . . . . . . . . . . . . 5-35

Vehicle Personalization . . . . . . . 5-55

. . . 2-1

Universal Remote System . . . . 5-64

. . . . . . . . . . . . . . . . . . . . . . . 6-1

Exterior Lighting . . . . . . . . . . . . . . . 6-1

Interior Lighting . . . . . . . . . . . . . . . . 6-5

Lighting Features . . . . . . . . . . . . . . 6-6

Introduction . . . . . . . . . . . . . . . . . . . . 7-1

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5

Audio Players . . . . . . . . . . . . . . . . 7-11

Phone . . . . . . . . . . . . . . . . . . . . . . . . 7-18

Climate Control Systems . . . . . . 8-1

Air Vents . . . . . . . . . . . . . . . . . . . . . . . 8-6

Maintenance . . . . . . . . . . . . . . . . . . . 8-7

. . . . 5-1

Driving Information . . . . . . . . . . . . . 9-2

Starting and Operating . . . . . . . 9-18

Engine Exhaust . . . . . . . . . . . . . . 9-26

Automatic Transmission . . . . . . 9-28

Manual Transmission . . . . . . . . . 9-32

Brakes . . . . . . . . . . . . . . . . . . . . . . . 9-34

Ride Control Systems . . . . . . . . 9-36

Cruise Control . . . . . . . . . . . . . . . . 9-45

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 9-48

Towing . . . . . . . . . . . . . . . . . . . . . . . 9-55

Conversions and Add-Ons . . . 9-55

. . . . . . . . . 7-1

General Information . . . . . . . . . . 10-3

Vehicle Checks . . . . . . . . . . . . . . . 10-8

Headlamp Aiming . . . . . . . . . . . 10-48

Bulb Replacement . . . . . . . . . . 10-48

Electrical System . . . . . . . . . . . . 10-50

Wheels and Tires . . . . . . . . . . . 10-58

. . . . . . . . . . . . . 8-1

Jump Starting . . . . . . . . . . . . . . . 10-82

Towing . . . . . . . . . . . . . . . . . . . . . . 10-86

Appearance Care . . . . . . . . . . . 10-87

. . . . . . . . 9-1

. . . . . . . . . . . . . . . . . 10-1

Table of Contents

Chapters

Table of Contents

Summary of Contents for Chevrolet 2011 Corvette Coupe

Page 1 ......1-1 Instrument Panel ....1-2 Initial Drive Information .
Page 2 . . . 11-1 General Information ..11-1 Scheduled Maintenance ..11-2 Recommended Fluids, Lubricants, and Parts ..11-6 Maintenance Records ..11-9 .
Page 3 For vehicles first sold in Canada, substitute the name General Motors of Canada Limited for Chevrolet Motor Division wherever it appears in this manual. Keep this manual the vehicle for quick reference. ©...
Page 4 To quickly locate information about the vehicle, use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found. Warning messages found on vehicle labels and in this manual describe hazards and what to do to avoid or reduce them.
Page 5 Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the Index. Airbag Readiness Light Air Conditioning Antilock Brake System (ABS) Audio Steering Wheel Controls ® or OnStar Brake System Warning Light Charging System...
Page 7: Exterior Lighting
In Brief Instrument Panel Instrument Panel ....1-2 Initial Drive Information Initial Drive Information ..1-4 Remote Keyless Entry (RKE) System .
Page 8 In Brief Instrument Panel...
Page 9: Air Vents
A. Air Vents on page 8 6. B. Head Up Display Controls (If Equipped). See Head-Up Display (HUD) on page 5 31. C. Turn and Lane Change Lever. See Turn and Lane-Change Signals (Auto Signal) on page 6 4. Cruise Control on page 9 45. Fog Lamps on page 6 5.
Page 10: Initial Drive Information
In Brief Initial Drive Information This section provides a brief overview about some of the important features that may or may not be on your specific vehicle. For more detailed information, refer to each of the features which can be found later in this owner manual.
Page 11: Door Locks
Door Locks From the outside, press on the keyless access transmitter. When you have the transmitter with you, you may also unlock and open the door by squeezing the door handle sensor (A). From the inside, use the power door lock switch (B), located at the top of the door panel, near both windows.
Page 12: Trunk Release
In Brief Trunk Release Opening and Closing the Hatch/Trunk There are three ways to open the hatch/trunk: Touch the button located above the license plate. The keyless access transmitter must be within three feet of the button. Press located to the left of the steering wheel.
Page 13 Power Seats To adjust a power seat, if equipped: Move the seat forward or rearward by sliding the control forward or rearward. Raise or lower the front or rear part of the seat cushion by moving the front or rear of the control up or down.
Page 14: Memory Features
In Brief Heated Seats If available, the buttons are on the center console. The ignition must be on for this feature to work. : Press to turn on the heated seat at the high setting. Press again to switch to the low setting.
Page 15 On vehicles with a manual transmission, when the vehicle is on, the parking brake must be set to recall a memory position. Press and release 1 or 2. A single beep sounds and the memory position is recalled after a brief delay. If the vehicle is on and the parking brake is not set, three beeps sound and the...
Page 16: Sensing System For Passenger Airbag
1-10 In Brief Safety Belts Refer to the following sections for important information on how to use safety belts properly. Safety Belts on page 3 9. How to Wear Safety Belts Properly on page 3 13. Lap-Shoulder Belt on page 3 18. Lower Anchors and Tethers for Children (LATCH System) (Coupe and Convertible Models...
Page 17: Mirror Adjustment
Mirror Adjustment Exterior Mirrors Controls for the outside power mirrors are located on the driver door. 1. Move the top control to the left or right to select either the driver or passenger mirror. 2. Use the arrows located on the four-way control pad to move the mirror in the desired direction.
Page 18: Interior Lighting
1-12 In Brief Telescopic Steering Column For vehicles with this feature, the telescopic steering column control is located on the right side of the steering column. To adjust the telescopic steering column: 1. Push the switch forward to move the wheel away from you. 2.
Page 19: Exterior Lighting
Exterior Lighting Exterior Lamps The exterior lamp control is located to the left of the steering wheel, on the multifunction lever. : Turn the band with this symbol on it to operate the exterior lamps. : Turns off all lamps. AUTO: Sets the exterior lamps to automatic mode.
Page 20: Climate Controls
1-14 In Brief : Use to turn off the windshield wipers. : Use for a for a single wiping cycle. For more wipes, hold the band longer. Windshield Washer: Press the button at the end of the lever until the washers begin. See Windshield Wiper/Washer on page 5 4.
Page 21 Transmission Manual Paddle Shift (Automatic Transmission) To operate the Manual Paddle Shift system, the automatic transmission shifter must be in S (Sport Mode). The system is activated by pushing the paddle, above the steering wheel spokes, to manually up-shift to the next gear, or pulling on the paddle, behind the steering wheel spokes to manually down-shift.
Page 22: Vehicle Features
1-16 In Brief Vehicle Features Radio(s) Radio with CD Top Knob: Press to turn the system on and off. Turn to increase or decrease the volume. BAND: Press to switch between FM1, FM2, AM, and if equipped, XM1 and XM2. : Turn to select radio stations.
Page 23: Satellite Radio
4. Press AUTO EQ to select the equalization. 5. Press and hold one of the six numbered pushbuttons until the radio beeps once. 6. Repeat the steps for each pushbutton. See Operation on page 7 2. Setting the Clock To set the clock: 1.
Page 24 1-18 In Brief ® Bluetooth For vehicles with a Bluetooth system, it allows users with a Bluetooth enabled cell phone to make and receive hands-free calls using the vehicle s audio system and controls. The Bluetooth enabled cell phone must be paired with the Bluetooth system before it can be used in the vehicle.
Page 25: Navigation System
Cruise Control The cruise controls are located at the end of the multifunction lever. : Turns the system off. : Turns the system on. : Makes the vehicle accelerate or resume a previously set speed. : Press the button at the end of the lever to set the speed.
Page 26: Lighting Features
1-20 In Brief : Press to display gauge information like oil pressure and temperature, coolant temperature, automatic transmission fluid temperature (if equipped), battery voltage, and front/rear tire pressures. TRIP: Press to display your total and trip distance driven, the elapsed time function, your average speed, and the engine oil life.
Page 27: Maintenance
Until you are sure you can remove the roof panel by yourself, have someone help you. Once removed, the roof panel should always be stored properly in the rear storage compartment. For more information: See Storing the Roof Panel under Roof Panel on page 2 19. See Installing the Roof Panel under Roof Panel on page 2 19.
Page 28: Zo6, Z16, And Zr
1-22 In Brief Tire Pressure Monitor This vehicle may have a Tire Pressure Monitor System (TPMS). The TPMS warning light alerts you to a significant loss in pressure of one of the vehicle's tires. If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure shown on the Tire and Loading...
Page 29: Driving For Better Fuel Economy
Car Wash Guidelines Automatic car washes are not recommended for this vehicle. Some car washes cause damage to the vehicle, the wheels, and the convertible top, if the vehicle is so equipped. If you drive the vehicle through an automatic car wash that does not have enough clearance for the undercarriage and/or wide rear tires and wheels, you could damage the...
Page 30: Roadside Assistance Program
Program U.S.: 1-800-243-8872 TTY Users (U.S.): 1-888-889-2438 Canada: 1-800-268-6800 Mexico: 01-800-466-0800 As the owner of a new Chevrolet, you are automatically enrolled in the Roadside Assistance program. See Roadside Assistance Program (U.S. and Canada) on page 13 8 or Roadside Assistance Program (Mexico) on page 13 10 for more information.
Page 31 ® OnStar OnStar uses several innovative technologies and live Advisors to provide a wide range of safety, security, navigation, diagnostics, and calling services. Automatic Crash Response In a crash, built in sensors can automatically alert an OnStar Advisor who is immediately connected to the vehicle to see if you need help.
Page 32 1-26 In Brief hardware. The vehicle has to have a working electrical system and adequate battery power for the OnStar equipment to operate. OnStar service may not work if the OnStar equipment isn t properly installed or you haven t maintained it and your vehicle is in good working order and in compliance with all government regulations.
Page 67: Table Of Contents
Seats and Restraints Head Restraints Head Restraints ....3-2 Front Seats Seat Adjustment ....3-2 Power Seat Adjustment .
Page 68: Seats And
Seats and Restraints Head Restraints The vehicle's front seats have head restraints in the outboard seating positions that cannot be adjusted. The front seat outboard head restraints are not designed to be removed. Front Seats Seat Adjustment WARNING You can lose control of the vehicle if you try to adjust a manual driver seat while the vehicle is moving.
Page 69: Power Seat Adjustment
Power Seat Adjustment To adjust a power seat, if equipped: Move the seat forward or rearward by sliding the control forward or rearward. Raise or lower the front or rear part of the seat cushion by moving the front or rear of the control up or down.
Page 70: Seats And Restraints
Seats and Restraints To recall a memory position: On vehicles with an automatic transmission, press and release 1 or 2. If the vehicle is in P (Park), a single beep sounds and the memory position is recalled after a brief delay. If the vehicle is not in P (Park), three beeps sound and the memory position is not recalled.
Page 71 Easy Exit Driver Seat This feature can move the seat rearward and the telescopic steering column, if equipped, out of the way to allow extra room to exit the vehicle. (Easy Exit Driver Seat): Press to save and recall the easy exit seat position.
Page 72: Lumbar Adjustment
Seats and Restraints Lumbar Adjustment Power Lumbar and Side Bolsters A. Lumbar Support Control B. Side Bolster Support Control To adjust the support, if equipped: Move control (A) forward or rearward to adjust lumbar support. Move control (B) up or down to adjust the side bolsters.
Page 73 To return the seatback to the upright position: 1. Lift the lever fully without applying pressure to the seatback, and the seatback will return to the upright position. 2. Push and pull on the seatback to make sure it is locked. WARNING Sitting in a reclined position when the vehicle is in motion can be...
Page 74: Seatback Latches
Seats and Restraints Seatback Latches To fold a seatback forward, lift the latch on top of the backside of the seat. The seatback locks when folded down. WARNING If either seatback is not locked, it could move forward in a sudden stop or crash.
Page 75 If available, the buttons are on the center console. The ignition must be on for this feature to work. (Heated Seat): Press to turn the heated seat on at the high setting. Press again to switch to the low setting. (Off): Press to turn the heated seat off.
Page 76 3-10 Seats and Restraints In most states and in all Canadian provinces, the law requires wearing safety belts. Here is why: You never know if you will be in a crash. If you do have a crash, you do not know if it will be a serious one.
Page 77 Get it up to speed. Then stop the vehicle. The rider does not stop. The person keeps going until stopped by something. In a real vehicle, it could be the windshield... Seats and Restraints or the instrument panel... 3-11...
Page 78: Safety Belts
3-12 Seats and Restraints or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense.
Page 79: How To Wear Safety Belts
How to Wear Safety Belts Properly This section is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and infants. If a child will be riding in the vehicle, see Older Children on page 3 37 or Infants and Young Children on page 3 39.
Page 80 3-14 Seats and Restraints Q: What is wrong with this? A: The shoulder belt is too loose. It will not give as much protection this way. WARNING You can be seriously hurt if the shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
Page 81 WARNING You can be seriously hurt if the lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
Page 82 3-16 Seats and Restraints Q: What is wrong with this? A: The belt is over an armrest. WARNING You can be seriously injured if the belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt.
Page 83 WARNING You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
Page 84: Lap-Shoulder Belt
3-18 Seats and Restraints Q: What is wrong with this? A: The belt is twisted across the body. WARNING You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces.
Page 85 If the shoulder portion of a passenger belt is pulled out all the way, the child restraint locking feature may be engaged. If this happens, let the belt go back all the way and start again. Engaging the child restraint locking feature in the right front seating position may affect the passenger sensing system.
Page 86: Safety Belt Use During
3-20 Seats and Restraints To unlatch the belt, push the button on the buckle. The belt should return to its stowed position. Before a door is closed, be sure the safety belt is out of the way. If a door is slammed against a safety belt, damage can occur to both the safety belt and the vehicle.
Page 87: Safety Belt Extender
The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Page 88: Replacing Safety Belt System
3-22 Seats and Restraints Replacing Safety Belt System Parts After a Crash WARNING A crash can damage the safety belt system in the vehicle. A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a crash.
Page 89 Airbags are designed to supplement the protection provided by safety belts. Even though today's airbags are also designed to help reduce the risk of injury from the force of an inflating bag, all airbags must inflate very quickly to do their job. Here are the most important things to know about the airbag system: WARNING...
Page 90: Where Are The Airbags
3-24 Seats and Restraints WARNING Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle safety belt system nor its airbag system is designed for them.
Page 91 The right front passenger frontal airbag is in the instrument panel on the passenger side. Driver Side Shown, Passenger Side Similar The seat-mounted side impact airbags for the driver and right front passenger are in the side of the seatbacks closest to the door. Seats and Restraints WARNING If something is between an...
Page 92: When Should An Airbag
3-26 Seats and Restraints When Should an Airbag Inflate? Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver's or right front passenger's head and chest. However, they are only designed to inflate if the impact exceeds a predetermined deployment...
Page 93: What Makes An Airbag
Your vehicle may have one or two seat position sensors, depending on what model you have. The seat position sensor(s) enable the sensing system to monitor the position of the driver seat (all models except ZO6 and ZR1) and the right front passenger seat (all models).
Page 94: How Does An Airbag
3-28 Seats and Restraints How Does an Airbag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle.
Page 95: Privacy
the interior lamps off, and turn the hazard warning flashers off by using the controls for those features. WARNING A crash severe enough to inflate the airbags may have also damaged important functions in the vehicle, such as the fuel system, brake and steering systems, etc.
Page 96: Passenger Sensing
3-30 Seats and Restraints Passenger Sensing System The vehicle has a passenger sensing system for the right front passenger position. The passenger airbag status indicator will be visible in the rearview mirror when the vehicle is started. United States Canada and Mexico The words ON and OFF, or the symbol for on and off, will be visible during the system check.
Page 97 WARNING (Continued) Even if the passenger sensing system has turned off the right front passenger frontal airbag and seat-mounted side impact airbag (if equipped), no system is fail-safe. No one can guarantee that an airbag will not deploy under some unusual circumstance, even though the airbag(s) are off.
Page 98 3-32 Seats and Restraints For some children who have outgrown child restraints and for very small adults, the passenger sensing system may or may not turn off the right front passenger frontal airbag and seat-mounted side impact airbag, depending upon the person's seating posture and body build.
Page 99 If the Off Indicator is Lit for an Adult-Size Occupant If a person of adult-size is sitting in the right front passenger seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. If this happens, use the following steps to allow the system to detect that person and enable the right front passenger...
Page 100: Servicing The Airbag-Equipped
3-34 Seats and Restraints A thick layer of additional material, such as a blanket or cushion, or aftermarket equipment such as seat covers, seat heaters, and seat massagers can affect how well the passenger sensing system operates. We recommend that you not use seat covers or other aftermarket equipment except when approved by GM for your specific...
Page 101: Adding Equipment To The Airbag-Equipped Vehicle
Adding Equipment to the Airbag-Equipped Vehicle Q: Is there anything I might add to or change about the vehicle that could keep the airbags from working properly? A: Yes. If you add things that change the vehicle's frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
Page 102: Replacing Airbag System Parts After A Crash
3-36 Seats and Restraints Your dealer and the service manual have information about the location of the airbag sensors, sensing and diagnostic module and airbag wiring. Airbag System Check The airbag system does not need regularly scheduled maintenance or replacement. Make sure the airbag readiness light is working.
Page 103: Child Restraints
Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle's safety belts. The manufacturer's instructions that come with the booster seat, state the weight and height limitations for that booster. Use a booster seat with a lap-shoulder belt until the child passes the below fit test: Sit all the way back on the seat.
Page 104 3-38 Seats and Restraints In a crash, children who are not buckled up can strike other people who are buckled up, or can be thrown out of the vehicle. Older children need to use safety belts properly. WARNING Never do this. Never allow two children to wear the same safety belt.
Page 105: Infants And Young
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be...
Page 106 3-40 Seats and Restraints WARNING Never do this. Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Never put a rear-facing child restraint in the right front seat. Secure a rear-facing child restraint in a rear seat.
Page 107: Child Restraint Systems
WARNING To reduce the risk of neck and head injury during a crash, infants need complete support. This is because an infant's neck is not fully developed and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing child restraint settles into the restraint, so the crash forces can be...
Page 108 3-42 Seats and Restraints (B) Forward-Facing Child Seat A forward-facing child seat (B) provides restraint for the child's body with the harness. (C) Booster Seats A booster seat (C) is a child restraint designed to improve the fit of the vehicle's safety belt system. A booster seat can also help a child to see out the window.
Page 109: Lower Anchors And Tethers
Tethers for Children (LATCH System) (ZO6 and ZR1 Models Only) on page 3 44 for more information. Children can be endangered in a crash if the child restraint is not properly secured in the vehicle. When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a...
Page 110: Models Only)
3-44 Seats and Restraints In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Your vehicle does not have lower anchors or top tether anchors to secure a child restraint with the LATCH system.
Page 111 A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in...
Page 112 3-46 Seats and Restraints The top tether anchor is located under the cover behind the passenger seat. Securing a Child Restraint with a Top Tether WARNING If a LATCH-type child restraint is not attached to anchors, the child restraint will not be able to protect the child correctly.
Page 113: Securing Child Restraints
Do not secure a child restraint in a position without a top tether anchor if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached.
Page 114 3-48 Seats and Restraints Replacing LATCH System Parts After a Crash WARNING A crash can damage the LATCH system in the vehicle. A damaged LATCH system may not properly secure the child restraint, resulting in serious injury or even death in a crash. To help make sure the LATCH system is working properly after a crash, see your dealer to have...
Page 115 WARNING (Continued) Secure rear-facing child restraints in a rear seat, even if the airbag is off. If you secure a forward-facing child restraint in the right front seat, always move the front passenger seat as far back as it will go. It is better to secure the child restraint in a rear seat.
Page 116 3-50 Seats and Restraints 4. Push the latch plate into the buckle until it clicks. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary. 5. Pull the shoulder belt all the way out of the retractor to set the lock.
Page 117 7. If the child restraint has a top tether, follow the child restraint manufacturer's instructions regarding the use of the top tether. See Lower Anchors and Tethers for Children (LATCH System) (Coupe and Convertible Models Only) on page 3 43 or Lower Anchors and Tethers for Children (LATCH System) (ZO6 and ZR1 Models Only) on...
Page 118 3-52 Seats and Restraints NOTES...
Page 123: Keys And Locks
Instruments and Controls Controls Steering Wheel Adjustment . . . 5-2 Steering Wheel Controls ..5-3 Horn ......5-4 Windshield Wiper/Washer .
Page 124: Instruments And Controls
Instruments and Controls Starting the Vehicle Messages ....5-50 Tire Messages ....5-51 Transmission Messages .
Page 125 The telescopic steering column position can be stored with your memory settings. See Memory Seat, Mirrors, and Steering Wheel under for more information. Steering Wheel Controls For vehicles with steering wheel controls, some audio controls can be adjusted at the steering wheel. (Mute/Push to Talk): Press to silence the vehicle speakers only.
Page 126: Horn
Instruments and Controls To select tracks on a CD: Press to go to the next or to the previous track when a CD is playing. Press and hold more than two seconds to scan the current CD. The CD goes to the next track, plays the first 10 seconds, then goes to the next track.
Page 127: Compass
Heavy snow or ice can overload the wipers. If this occurs, a circuit breaker will stop the wipers until the motor cools. Clear all ice and snow from the wiper blades before using them. If frozen to the windshield, carefully loosen them or thaw them. Damaged wiper blades should be replaced.
Page 128: Clock
Instruments and Controls Depending on the mirror, in order to calibrate, CAL must be displayed in the mirror compass windows. If CAL is not displayed, press several seconds or until CAL is displayed. If the compass has map lamps, it can be placed in calibration mode by pressing and holding the left map light button until a C appears on the...
Page 129: Cigarette Lighter
WARNING Power is always supplied to the outlets. Do not leave electrical equipment plugged in when the vehicle is not in use because the vehicle could catch fire and cause injury or death. Leaving electrical equipment plugged in for an extended period of time while the vehicle is off will drain the battery.
Page 130: Ashtrays
Instruments and Controls Ashtrays The ashtray and cigarette lighter are located on the instrument panel, in front of the shift lever. To use the ashtray, press on the indentation at the top of the door. If papers, pins, or other flammable items are put in the ashtray, hot cigarettes or other smoking materials could ignite...
Page 131: Instrument Cluster
Instruments and Controls Instrument Cluster English Coupe and Convertible Shown, Metric Similar...
Page 132 5-10 Instruments and Controls English Shown, ZO6, and Metric Similar...
Page 133: Speedometer
Speedometer The speedometer shows the speed in either kilometers per hour (km/h) or miles per hour (mph). For more information see Personal Options under Odometer To read the odometer with the ignition off, turn on the parking lamps. If the vehicle needs a new odometer installed, the mileage total of the new odometer will be set to the original kilometers (miles) of the old...
Page 134: Boost Gauge (Zr1)
5-12 Instruments and Controls When the needle approaches the low fuel symbol, a chime sounds and LOW FUEL appears on the Driver Information Center (DIC) display. There is still a little fuel left, but the vehicle's fuel tank should be filled soon. Press the RESET button to acknowledge a DIC message(s).
Page 135: Engine Oil Pressure
For vehicles that have this gauge, it is located near the instrument panel cluster. This gauge indicates vacuum during light to moderate throttle and boost under heavier throttle. It displays the air pressure level in the intake manifold before it enters the engine's combustion chamber.
Page 136 5-14 Instruments and Controls Metric ZO6 and ZR1 Models WARNING Do not keep driving if the oil pressure is low. The engine can become so hot that it catches fire. Someone could be burned. Check the oil as soon as possible and have the vehicle serviced.
Page 137: Engine Coolant Temperature Gauge
Engine Coolant Temperature Gauge English Instruments and Controls Metric This gauge shows the engine coolant temperature. If the gauge pointer moves into the shaded area, the engine is too hot. This means that the engine coolant has overheated. If the vehicle has been operating under normal driving conditions, pull off the road, stop the vehicle and turn off the engine as...
Page 138: Safety Belt Reminders
5-16 Instruments and Controls other systems may shut down. The Driver Information Center (DIC) reads BATTERY VOLTAGE LOW when the vehicle is at 10 volts or below. Have it checked right away. Driving with the voltmeter reading at 10 volts or below could drain the battery and disable the vehicle.
Page 139: Passenger Airbag Status
The airbag readiness light flashes for a few seconds when the engine is started. If the light does not come on then, have it fixed immediately. WARNING If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly.
Page 140: Malfunction
5-18 Instruments and Controls If the word OFF or the off symbol is lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the right front passenger frontal airbag and seat-mounted side impact airbag (if equipped). for more on this, including important safety information.
Page 141 If the vehicle is continually driven with this light on, after a while, the emission controls might not work as well, the vehicle fuel economy might not be as good, and the engine might not run as smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.
Page 142 5-20 Instruments and Controls Make sure to fuel the vehicle with quality fuel. Poor fuel quality causes the engine not to run as efficiently as designed and may cause: stalling after start-up, stalling when the vehicle is changed into gear, misfiring, hesitation on acceleration, or stumbling on acceleration.
Page 143: Brake System Warning
Brake System Warning Light The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working. English Metric This light comes on briefly while starting the engine.
Page 144: One-To-Four Shift Light (Manual Transmission)
5-22 Instruments and Controls Antilock Brake System (ABS) Warning Light For vehicles with the Antilock Brake System (ABS), this light comes on briefly when the engine is started. If it does not, have the vehicle serviced by your dealer. If the system is working normally the indicator light then goes off.
Page 145: Active Handling System
Active Handling System Light The Active Handling System light comes on briefly as the engine is started. If the light does not, have the vehicle serviced by your dealer. If the system is working normally the light goes off. If the light stays on or comes on while driving, a chime sounds and a SERVICE ACTIVE HANDLING SYSTEM message appears on the...
Page 146: Tire Pressure Light
5-24 Instruments and Controls When the TCS is turned off, this light comes on and a TRACTION SYSTEM OFF message displays on the DIC. When this light is on, the TCS system does not limit wheel spin. When the TCS is turned back on, this light turns off and a TRACTION SYSTEM ON message displays on the DIC...
Page 147: High-Beam On Light
The DIC comes on when the ignition is turned on. After displaying CORVETTE BY CHEVROLET, the DIC shows the information that was last displayed before the engine was turned off. If a problem is detected, a warning message appears on the DIC display.
Page 148 5-26 Instruments and Controls DIC Operation and Displays Depending on the features on the vehicle, the drive gear may display on the DIC. See Manual Paddle Shift under for more information. The Driver Information Center (DIC) has different modes which can be accessed by pressing the following buttons located on the instrument panel, to the right of the instrument...
Page 149 Fuel Button The fuel button displays average fuel economy and instantaneous fuel economy, calculated for your specific driving conditions, and range information. Average Fuel Economy: The average fuel economy is viewed as a long-term approximation of your overall driving conditions. You should reset the average fuel economy display every time you refuel.
Page 150 5-28 Instruments and Controls Gauges Button The gauges button displays oil pressure, oil temperature, coolant temperature, transmission fluid temperature for automatic transmission vehicles only, battery voltage, and tire pressure information. Oil Pressure: This display shows the oil pressure. Press the gauges button to display the oil pressure, such as: OIL PRESSURE 276 kPa or OIL PRESSURE 40 PSI...
Page 151 Battery Voltage: This display shows the current battery voltage. Press the gauges button again to display the battery voltage, such as: BATTERY VOLTAGE 13.5 VOLTS Tire Pressure: This display shows the tire pressure for each tire. Press the gauges button again to display the tire pressure for the front tires, such as: FRONT TIRE PRESSURES...
Page 152 5-30 Instruments and Controls You can start or stop the elapsed time by pressing the RESET button. To reset the elapsed time to zero, press the RESET button for three seconds while the timer is displayed. Pressing and holding the RESET button for at least 10 seconds will reset the timer display to the time since last ignition cycle.
Page 153: Head-Up Display (Hud)
Head-Up Display (HUD) WARNING If the HUD image is too bright, or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
Page 154 5-32 Instruments and Controls There are three HUD modes that can be viewed in the HUD display. Press the MODE button to scroll through these modes in the following order: English Metric Street Mode supports audio and navigation functions with your choice of tachometer settings.
Page 155 Within each mode, the display, can be further customized by pressing the PAGE button. Pressing this button in each mode will turn off and on the following: Street Mode No tachometer, circular tachometer, and linear tachometer. Track Modes 1 and 2 minor gauge, coolant temperature, transmission oil temperature, engine oil...
Page 156 5-34 Instruments and Controls To adjust the HUD so it can be seen properly, do the following: 1. Start the engine and press the HUD dimmer control all the way up by pressing the (+) button. The brightness of the HUD image is determined by the light conditions in the direction the vehicle is facing and where you...
Page 157: Vehicle Messages
If the ignition is on and the HUD image cannot be seen, check to see if: Something is covering the HUD unit. The HUD dimmer control is adjusted properly. The HUD image is adjusted to the proper height. Ambient light is low, in the direction the vehicle is facing.
Page 158: Brake System Messages
5-36 Instruments and Controls SERVICE CHARGING SYSTEM If this message displays while you are driving, there may be a problem with the electrical charging system. It could mean that there is a loose or broken drive belt or that there is another electrical problem.
Page 159: Convertible Top Messages
on, you still have brakes, but do not have ABS. If the regular brake system warning light is also on, you do not have ABS and there is a problem with the brakes. See If this message is displayed, the Traction Control System (TCS) and the Active Handling System will also be disabled.
Page 160: Cruise Control Messages
5-38 Instruments and Controls TOO COLD TO MOVE TOP This message displays and a sound will be heard when the power convertible top button is pressed and the power convertible top pump motor temperature is below 20°C ( 4°F). Wait for the power convertible top pump motor to warm up before using the power convertible top.
Page 161: Door Ajar Messages
Door Ajar Messages DRIVER DOOR AJAR This message displays if the driver door is not closed properly. Make sure that the door is closed completely. HATCH AJAR (Coupe) This message displays when the hatch is not closed completely. Make sure that the hatch is closed completely.
Page 162: Engine Oil Messages
5-40 Instruments and Controls ENGINE OVERHEATED STOP ENGINE This message displays and a sound will be heard when the engine has overheated. Stop and turn the engine off immediately to avoid severe engine damage. See ENGINE PROTECTION REDUCE ENGINE RPM This message displays if the engine oil temperature exceeds 160°C (320°F).
Page 163: Engine Power Messages
LOW OIL PRESSURE This message displays if low oil pressure levels occur. If this message appears while the engine is running, stop the engine and do not operate it until the cause of low oil pressure is corrected. Severe damage to the engine can result. A sound will be heard when this message is displayed.
Page 164: Key And Lock Messages
5-42 Instruments and Controls LOW FUEL This message displays when the fuel tank is less than 10 percent full and the display is turned off. A sound will be heard when this message is displayed. Refill the fuel tank as soon as possible. See SERVICE FUEL SYSTEM This message displays if the Powertrain Control Module (PCM)
Page 165 The vehicle is experiencing Electromagnetic Interference (EMI). Some locations, such as airports, automatic toll booths, and some gas stations have EMI fields which may interfere with the RKE transmitter. If moving the transmitter to different locations within the vehicle does not help, place the transmitter in the glove box transmitter pocket with the buttons facing to the right and...
Page 166: Lamp Messages
5-44 Instruments and Controls Lamp Messages HEADLAMPS SUGGESTED This message displays if it is dark enough outside and the headlamps ® and the Twilight Sentinel controls are off. This message informs the driver that turning on the exterior lamps is recommended. It has become dark enough outside to require the headlamps and/or other exterior lamps.
Page 167 MAXIMUM SPEED 129 km/h (80 MPH) This message displays when a malfunction is present in the Selective Ride Control system. The vehicle speed will be limited to a value determined by the vehicle when the shock absorber system has failed and the shocks are in their full soft mode.
Page 168 5-46 Instruments and Controls PERF TRAC 3 SPORT ACTIVE HANDLING ON This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument panel cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected.
Page 169 SERVICE ACTIVE HANDLING SYSTEM This message displays if there is a problem with the Active Handling System and the vehicle needs service. The active handling system light on the instrument panel cluster also turns on and a sound will be heard.
Page 170 5-48 Instruments and Controls SHOCKS INOPERATIVE This message displays when a malfunction is present in the Selective Ride Control system which is causing the shocks to be in their full soft mode. This is a warning to the driver that the vehicle handling may be affected.
Page 171: Safety Belt Messages
TRACTION SYSTEM This message displays and stays on, a sound will be heard, and the traction control system (TCS) warning light on the instrument panel cluster turns on when the TCS is turned off by pressing the Active Handling System button on the console.
Page 172: Anti-Theft Alarm System
5-50 Instruments and Controls Anti-Theft Alarm System Messages INTRUSION SENSOR OFF This message may display when the anti-theft alarm has been disarmed. INTRUSION SENSOR ON This message may display when the anti-theft alarm has been armed. Service Vehicle Messages SERVICE AIR CONDITIONING This message displays when the electronic sensors that control the air conditioning and heating...
Page 173: Tire Messages
Tire Messages HIGH TIRE PRESSURE This message may be displayed when one or more of the tires is overinflated. This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate which tire is affected. You can receive more than one tire pressure message at a time.
Page 174 5-52 Instruments and Controls Have the tire pressures checked and set to those shown on the Tire and Loading Information label. See , and . The DIC also shows the tire pressure values. See To acknowledge the message, press the RESET button. A message reappears every 10 minutes until the condition is corrected.
Page 175: Transmission Messages
You can receive more than one tire pressure message at a time. To read other messages that may have been sent at the same time, press the RESET button. If a tire pressure message appears on the DIC, stop as soon as you can. Have the tire pressures checked and set to those shown on the Tire and Loading Information label.
Page 176: Washer Fluid Messages
5-54 Instruments and Controls If this message is displayed during normal vehicle operation on flat roads, the vehicle may need service. See your dealer for an inspection. If driving in a performance or competitive manner, the use of (S) Sport Automatic Mode or (S) Sport Manual Paddle Shift gear selection is recommended.
Page 177: Vehicle Personalization
Vehicle Personalization Many features on your vehicle can be personalized. This means that the operation of these features can be set to operate differently depending on who is driving the vehicle. See Personal Options later in this section for the features that you can personalize.
Page 178 5-56 Instruments and Controls Entering the Personal Options Menu To enter the personal options menu, use the following steps: 1. If you have an automatic transmission vehicle, turn the vehicle on with the shift lever in P (Park). If you have a manual transmission vehicle, turn the vehicle on with the parking brake set.
Page 179 Auto Memory Recall (Automatic Transmission only): If your automatic transmission vehicle has the memory package, you may have this option. This option allows the driver seat, the telescopic steering column, if your vehicle has this feature, and the outside rearview mirrors to automatically move to the current driver's set position when the engine starts.
Page 180 5-58 Instruments and Controls When the mode you want is selected, press the OPTION button to set your choice and advance to the next personal option. Approach Lights: This option briefly turns on the parking lamps, the high-beam headlamps, and the back-up lamps during low light periods when the RKE transmitter is used to unlock the vehicle.
Page 181 Press the OPTION button until TWILIGHT DELAY appears on the display, then press the RESET button to scroll through the following modes: 15 S 30 S (default) 90 S If you choose OFF, this option will turn off. If you choose 15 S, the twilight delay time will be set to 15 seconds.
Page 182 5-60 Instruments and Controls When the mode you want is selected, press the OPTION button to set your choice and advance to the next personal option. FOB Reminder: This option sounds the horn three times when the driver door is closed and there is a RKE transmitter inside the interior of the vehicle.
Page 183 If you choose SILENT, the doors will automatically lock a short time after you remove a RKE transmitter from the interior of the vehicle and close both doors. If you choose HORN, the doors will automatically lock and the horn will sound a short time after you remove a RKE transmitter from the interior of the vehicle and close both doors.
Page 184 5-62 Instruments and Controls If you choose DRIVER, on automatic transmission vehicles, the driver door will automatically unlock when the shift lever is moved into P (Park). On manual transmission vehicles, the driver door will automatically unlock when the ignition is turned off or is in RAP. If you choose BOTH, on automatic transmission vehicles, both doors will automatically unlock when the...
Page 185 To program a name, use the following procedure: 1. Enter the PERSONAL OPTIONS menu and select the driver number (1 or 2) that you would like to program by following the instructions listed previously under Entering the Personal Options Menu . 2.
Page 186: Universal Remote System
5-64 Instruments and Controls Universal Remote System for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-210/220/310. The FCC Grant of Equipment Authorization Certificate number is KOBFTE05A. The Canadian Registration ID number is 3521A-FTE05A. Universal Remote System Programming This system provides a way to...
Page 187 Programming Universal Home Remote Rolling Code For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to www.learcar2u.com. Most garage door openers sold after 1996 are Rolling Code units. Programming a garage door opener involves time-sensitive actions, so read the entire procedure before starting.
Page 188 5-66 Instruments and Controls 4. Immediately return to the vehicle. Press and hold the Universal Home Remote button that will be used to control the garage door until the garage door moves. The indicator light, above the selected button, should slowly blink. This button may need to be held for up to 20 seconds.
Page 189 2. To verify that the garage door opener is a Fixed Code unit, remove the battery cover on the hand-held transmitter supplied by the manufacturer of the garage door opener motor. If there is a row of dip switches similar to the graphic above, the garage door opener is a Fixed Code unit.
Page 190 5-68 Instruments and Controls The switch positions on the hand-held transmitter could be labeled as follows: A switch in the up position could be labeled as Up, +, or On. A switch in the down position could be labeled as Down, , or Off.
Page 191: Universal Remote System Operation
If you wrote Left, press the left button (A) in the vehicle. If you wrote Right, press the right button (C) in the vehicle. If you wrote Middle, press the middle button (B) in the vehicle. 6. After entering all of the switch positions, again, firmly press and release all three buttons at the same time.
Page 192 5-70 Instruments and Controls Reprogramming Universal Home Remote Buttons Any of the three buttons can be reprogrammed by repeating the instructions. Erasing Universal Home Remote Buttons The programmed buttons should be erased when the vehicle is sold or the lease ends. To erase either Rolling Code or Fixed Code on the Universal Home Remote device:...
Page 201 Infotainment ....7-1 Theft-Deterrent Feature ..7-2 Operation ..... 7-2 AM-FM Radio .
Page 202: Vehicle Identification
for more information. For vehicles with a navigation radio system, see the separate Navigation System Manual. ® TheftLock is designed to discourage theft of the vehicle's radio by learning a portion of the Vehicle Identification Number (VIN). The radio does not operate and LOCKED displays if the radio is stolen or moved to a different vehicle.
Page 203 Press to turn the system on and off. Turn to increase or decrease the volume. Press to silence the system. Press again to turn the sound on. This button is not available on the Six-Disc CD Radio. Press until the desired display is shown, then hold for two seconds until the radio beeps once to change the default...
Page 204: Radio
To adjust the Fade: Press and release until FADE displays Turn the knob to move the sound toward the front or the rear speakers. Press and hold the knob until the level changes to the middle position. The radio saves separate AUTO EQ settings for each preset and source.
Page 205 To use AudioPilot: 1. Set the volume at the desired level. 2. Press AUTO until AUTO VOLUME ON displays. 3. Press AUTO until AUTO VOLUME OFF displays to turn off AudioPilot. Displays if the radio is no longer configured properly for the vehicle. The vehicle must be returned to your dealer for service.
Page 206 Alert warns of local or national emergencies. When an alert announcement comes on the current radio station, ALERT! displays. The announcement is heard, even if the volume is low or a CD is playing. If a CD is playing, play stops during the announcement.
Page 207 Press to switch between FM1, FM2, AM, XM1, or XM2. Turn to select radio stations. Press to go to the previous or to the next station and stay there. The radio only stops at stations with a strong signal. Press and hold for two seconds until FREQUENCY SCAN displays.
Page 208 XM is a satellite radio service based in the 48 contiguous United States and 10 Canadian provinces. XM Satellite Radio has a wide variety of programming and commercial-free music, coast to coast, and in digital-quality sound. A service fee is required to receive the XM service.
Page 209 To scan the stations within a category: 1. Press CAT. The last selected category displays. 2. Turn the knob to select a category. 3. Press and hold until a beep sounds and SCAN CATEGORY displays. The radio begins scanning the stations in the category.
Page 210 This channel is blocked or cannot be received with your XM Subscription package. This previously assigned channel is no longer assigned. Tune to another station. If this station was one of the presets, choose another station for that preset button. No artist, song title, category, or text information is available at this time on this...
Page 211: Roof
FM signals only reach about 16 to 65 km (10 to 40 mi). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills, causing the sound to fade in and out.
Page 212 Store CDs in their original cases or other protective cases and away from direct sunlight and dust. The CD player scans the bottom of the disc. If the bottom of a CD is damaged it may not play properly or at all.
Page 213 To load more than one CD but less than six, complete Steps 1 through 3. When finished loading CDs, press to cancel the loading function. The radio begins to play the last CD loaded. Turn to go to the next or previous track. Press and hold to reverse within the current track.
Page 214 The CD is automatically pulled back into the player if the CD is not removed after 25 seconds. Pushing a CD back into the player before the 25 second time period is complete causes the player to sense an error, the CD player tries to eject the CD several times before stopping.
Page 215 SONGLIST FULL displays if more than 20 selections are stored. To play tracks: 1. Press . One beep sounds and S-LIST displays. The recorded tracks begin to play in the order they were saved. 2. Press to go back or forward within the saved tracks.
Page 216 The following bit rates are supported: 32 kbps, 40 kbps, 56 kbps, 64 kbps, 80 kbps, 96 kbps, 112 kbps, 128 kbps, 160 kbps, 192 kbps, 224 kbps, 256 kbps, and 320 kbps or a variable bit rate. ID3v1 and ID3v2 tags are supported.
Page 217: Audio Players
Press to hear a track, CD, or folder over again. Press and release RPT until: REPEAT displays to repeat a track. REPEAT ONE DISC displays to repeat a CD. REPEAT FOLDER displays to repeat a folder. REPEAT OFF displays to turn off repeated play.
Page 218 For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: Placement and receipt of calls in a hands-free mode. Sharing of the cell phone s address book or contact list with the vehicle. To minimize driver distraction, before driving, and with the vehicle parked: Become familiar with the...
Page 219 Keep interior noise levels to a minimum. The system may not recognize voice commands if there is too much background noise. A short tone sounds after the system responds indicating when it is waiting for a voice command. Wait until the tone and then speak.
Page 220 1. Press and hold two seconds. 2. Say Bluetooth. 3. Say Pair. The system responds with instructions and a four digit Personal Identification Number (PIN). The PIN is used in Step 5. 4. Start the pairing process on the cell phone that you want to pair. For help with this process, see your cell phone manufacturers user guide.
Page 221 3. Say Change phone. If another cell phone is found, the response will be <Phone name> is now connected. If another cell phone is not found, the original phone remains connected. The system can store up to 30 phone numbers as name tags in the Hands Free Directory that is shared between the Bluetooth and OnStar systems.
Page 222 1. Press and hold two seconds. 2. Say Delete. 3. Say the name tag you want to delete. This command deletes all stored name tags in the Hands Free Calling Directory and the OnStar Turn by Turn Destinations Directory. To delete all name tags: 1.
Page 223 To hear all of the numbers recognized by the system, say Verify at any time. 1. Press and hold two seconds. 2. Say Digit Dial. 3. Say each digit, one at a time, that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone.
Page 224 During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. To mute a call, press and then say Mute Call. To cancel mute, press then say Un mute Call.
Page 225 The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu driven phone system. Account numbers can also be stored for use. 1. Press . The system responds Ready , followed by a tone.
Page 235 Driving and Operating Driving Information Defensive Driving ... . . 9-2 Drunk Driving ....9-2 Control of a Vehicle .
Page 236: Driving And Operating
Driving and Operating Driving Information Defensive Driving Defensive driving means always expect the unexpected. The first step in driving defensively is to wear the safety belt. See WARNING Assume that other road users (pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes.
Page 237: Control Of A Vehicle
For persons under 21, it is against the law in every U.S. state to drink alcohol. There are good medical, psychological, and developmental reasons for these laws. The obvious way to eliminate the leading highway safety problem is for people never to drink alcohol and then drive.
Page 238: Steering
Driving and Operating Avoid needless heavy braking. Some people drive in spurts, heavy acceleration followed by heavy braking, rather than keeping pace with traffic. This is a mistake. The brakes might not have time to cool between hard stops. The brakes will wear out much faster with a lot of heavy braking.
Page 239: Off-Road Recovery
Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
Page 240: Loss Of Control
Driving and Operating Turn the steering wheel 8 to 13 cm (3 to 5 in), about one-eighth turn, until the right front tire contacts the pavement edge. Then turn the steering wheel to go straight down the roadway. Loss of Control Let us review what driving experts say about what happens when the three control systems...
Page 241: Racing Or Other Competitive
Racing or Other Competitive Driving Racing or competitive driving may affect the vehicle warranty. See the warranty book before using the vehicle for racing or other competitive driving. If you use the vehicle for racing or other competitive driving, the engine may use more oil than it would with normal use.
Page 242 Driving and Operating If the vehicle is used for racing or other competitive driving, the rear axle fluid temperatures may be higher than would occur in normal driving. We recommend that the rear axle fluid be drained and refilled with new fluid after every 24 hours of racing or competitive driving.
Page 243: Driving On Wet Roads
Brake pedal fade will occur during this track burnish procedure and can cause brake pedal travel and force to increase. This could extend stopping distance until the brakes are fully burnished. 1. Drive a normal first lap and not too aggressive. 2.
Page 244: Highway Hypnosis
9-10 Driving and Operating Other Rainy Weather Tips Besides slowing down, other wet weather driving tips include: Allow extra following distance. Pass with caution. Keep windshield wiping equipment in good shape. Keep the windshield washer fluid reservoir filled. Have good tires with proper tread depth.
Page 245: Winter Driving
Stay in your own lane. Do not swing wide or cut across the center of the road. Drive at speeds that let you stay in your own lane. Top of hills: Be alert something could be in your lane (stalled car, accident). Pay attention to special road signs (falling rocks area, winding roads, long grades, passing or...
Page 246 9-12 Driving and Operating Blizzard Conditions Being stuck in snow can be a serious situation. Stay with the vehicle unless there is help nearby. If possible, use the . To get help and keep everyone in the vehicle safe: Turn on the hazard warning flashers.
Page 247: If The Vehicle Is Stuck
Run the engine for short periods only as needed to keep warm, but be careful. To save fuel, run the engine for only short periods as needed to warm the vehicle and then shut the engine off and close the window most of the way to save heat.
Page 248: Vehicle Load Limits
9-14 Driving and Operating Vehicle Load Limits It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo and all nonfactory installed options. Two labels on your vehicle show how much weight it may properly carry, the Tire and...
Page 249 The Tire and Loading Information label also shows the size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see There is also important loading information on the vehicle Certification label.
Page 250 9-16 Driving and Operating Example 1 A. Vehicle Capacity Weight for Example 1 = (400 kg) (181 lbs) B. Subtract Occupant Weight @ 68 kg (150 lbs) × 1 = 68 kg (150 lbs) C. Available Occupant and Cargo Weight = 113 kg (250 lbs) Example 2 A.
Page 251 Refer to your vehicle's Tire and Loading Information label for specific information about your vehicle's capacity weight and seating positions. The combined weight of the driver, passengers and cargo should never exceed your vehicle's capacity weight. Certification Label A vehicle specific Certification label is attached to the rear edge of the driver's door.
Page 252: Starting And Operating
9-18 Driving and Operating If you put things inside your vehicle like suitcases, tools, packages or anything else they will go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they will keep going. WARNING Things you put inside your vehicle can strike and injure...
Page 253: Front Air Dam
For the first 80 km (500 miles): Avoid full throttle starts and abrupt stops. Do not exceed 4,000 rpm. Avoid driving at any one constant speed, fast or slow, including the use of cruise control. Avoid downshifting to brake or slow the vehicle when the engine speed will exceed 4000 rpm.
Page 254: Ignition Positions
9-20 Driving and Operating Ignition Positions The vehicle has an electronic keyless ignition with a push-button start. In order to shift out of P (Park), the vehicle must be running or in Acc. mode and the regular brake pedal must be applied. (START): Press this button while your foot is on the brake for an automatic transmission, or while...
Page 255: Starting The Engine
WARNING Turning off the vehicle while moving may cause loss of power assist in the brake and steering systems and disable the airbags. While driving, only shut the vehicle off in an emergency. 5. If the vehicle must be shut off while driving, turn the ignition to ACC/ACCESSORY.
Page 256 9-22 Driving and Operating Cell phone chargers can interfere with the operation of the Keyless Access System. Battery chargers should not be plugged in when starting or turning off the engine. To start the vehicle, do the following: 1. For vehicles with an automatic transmission, with your foot on the brake pedal, press the START button located on the...
Page 257: Retained Accessory
Cranking the engine for long periods of time, by pressing the START button immediately after cranking has ended, can overheat and damage the cranking motor, and drain the battery. Wait at least 15 seconds between each try, to allow the cranking motor to cool down.
Page 258: Shifting Into Park
9-24 Driving and Operating Shifting Into Park (Automatic Transmission) WARNING It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
Page 259: Shifting Out Of Park
If you have to leave the vehicle with the engine running, be sure the vehicle is in P (Park) and the parking brake is firmly set before you leave it. After you have moved the shift lever into P (Park), hold down the regular brake pedal.
Page 260: Parking
9-26 Driving and Operating To shift out of P (Park) use the following: 1. Apply the brake pedal. 2. Release the parking brake. See 3. Press the shift lever button. 4. Move the shift lever to the desired position. If you still are unable to shift out of P (Park): 1.
Page 261: Running The Vehicle While
WARNING (Continued) There are holes or openings in the vehicle body from damage or after market modifications that are not completely sealed. If unusual fumes are detected or if it is suspected that exhaust is coming into the vehicle: Drive it only with the windows completely down.
Page 262: Automatic Transmission
9-28 Driving and Operating Automatic Transmission There are several different positions for the shift lever. P (Park): This position locks the rear wheels. It is the best position to use when starting the engine because the vehicle cannot move easily. WARNING It is dangerous to get out of the vehicle if the shift lever is not fully...
Page 263: Manual Mode
N (Neutral) only. If the vehicle needs towing, see WARNING Shifting into a drive gear while the engine is running at high speed is dangerous. Unless your foot is firmly on the brake pedal, the vehicle could move very rapidly. You could lose control and hit people or objects.
Page 264 9-30 Driving and Operating Traction Control System (TCS). The Manual Paddle Shift system can be deactivated by moving the shifter from S (Sport Mode) back to D (Drive), or by holding either up shift paddle for more than one second. The driver may choose to briefly activate the Manual Paddle Shift system while in D (Drive).
Page 265 If the vehicle has a HUD, and the transmission gear does not respond to a shift change, a chime will sound and the HUD will momentarily show an X over the gear display. Manual Paddle Shift operation is available for use with Cruise Control.
Page 266: Manual Transmission
9-32 Driving and Operating Manual Transmission This is the shift pattern for the six-speed manual transmission. Here is how to operate the transmission: 1 (First): Press the clutch pedal and shift into 1 (First). Then slowly let up on the clutch pedal as you press the accelerator pedal.
Page 267 Shift Speeds (Manual Transmission) WARNING If you skip a gear when you downshift, you could lose control of the vehicle. You could injure yourself or others. Do not shift down more than one gear at a time when you downshift. This chart shows when to shift to the next higher gear for the best fuel economy.
Page 268: Brakes
9-34 Driving and Operating Downshifting (Manual Transmission) Do not downshift into the gear shown below at a speed greater than shown in the table: 1 (First) 80 km/h (50 mph) 2 (Second) 119 km/h (74 mph) 163 km/h 3 (Third) (101 mph) 209 km/h 4 (Fourth)
Page 269: Parking Brake
If driving safely on a wet road and it becomes necessary to slam on the brakes and continue braking to avoid a sudden obstacle, a computer senses that the wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each wheel.
Page 270: Brake Assist
9-36 Driving and Operating Brake Assist This vehicle has a brake assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brake control module to supplement the power brake system under conditions where the driver has quickly and forcefully applied the...
Page 271: Active Handling System
TCS automatically comes on whenever the vehicle is started. To limit wheel spin, especially in slippery road conditions, the system should always be left on. TCS can be turned off if needed. To turn the system off, press the button located on the console. The system can be turned on or off at any time by pressing the ACTIVE HANDLING button.
Page 272 9-38 Driving and Operating When this light and the SERVICE ACTIVE HANDLING SYSTEM message are on, the system is not operational. Adjust your driving accordingly. The Active Handling System comes on automatically whenever the vehicle is started. To help maintain directional control of the vehicle, the system should always be left on.
Page 273: Competitive Driving Mode
Competitive Driving Mode Competitive Driving Mode, Performance Traction Management, and Launch Control are systems designed to allow increased performance while accelerating and/ or cornering. This is accomplished by regulating and optimizing the engine, brakes, and suspension performance. These modes are for use at a closed course race track and are not intended for use on public roads.
Page 274 9-40 Driving and Operating Performance Traction Management (ZR1) Performance Traction Management integrates the Traction Control, Active Handling, and Selective Ride Control systems to provide improved and consistent performance when cornering. The amount of available engine power is based on the mode selected, track conditions, driver skill, and the radius of each corner.
Page 275 The following is a DIC display description and the recommended usage of each mode: PERF TRAC 1 WET ACTIVE HANDLING ON Intended for all driver skill levels Wet or damp conditions only not intended for use in heavy rain or standing water Active Handling is on and engine power is reduced based on conditions...
Page 276 9-42 Driving and Operating Launch Control A Launch Control feature is available, within Competitive Driving Mode (except ZR1) or Performance Traction Management (ZR1), on vehicles with a manual transmission to allow the driver to achieve high levels of vehicle acceleration in a straight line.
Page 277: Limited-Slip Rear Axle
Limited-Slip Rear Axle Vehicles with a limited-slip rear axle can give more traction on snow, mud, ice, sand or gravel. It works like a standard axle most of the time, but when traction is low, this feature allows the drive wheel with the most traction to move the vehicle.
Page 278 9-44 Driving and Operating This knob is located on the center console. Turn it to select the suspension of your choice. The knob will return to the center position when released. The switch will illuminate the current suspension setting. TOUR: Use for normal city and highway driving.
Page 279: Cruise Control
Cruise Control With cruise control, a speed of about 40 km/h (25 mph) or more can be maintained without keeping your foot on the accelerator. Cruise control does not work at speeds below about 40 km/h (25 mph). Cruise control will not work if the parking brake is set, or if the master cylinder brake fluid level is low.
Page 280 9-46 Driving and Operating Resuming a Set Speed If the cruise control is set at a desired speed and then the brakes are applied, the cruise control is disengaged without erasing the set speed from memory. Once the vehicle speed reaches about 40 km/h (25 mph) or more, move the cruise control switch briefly from to...
Page 281 Using Cruise Control on Hills How well the cruise control works on hills depends upon the vehicle speed, load, and the steepness of the hills. When going up steep hills, you might want to step on the accelerator pedal to maintain the vehicle speed.
Page 282: Fuel
9-48 Driving and Operating Ending Cruise Control To disengage cruise control, step lightly on the brake pedal. If the vehicle has a manual transmission, lightly tap the clutch to end the cruise control session. To turn off the cruise control system, move the cruise control switch to When cruise control is disengaged,...
Page 283: Recommended Fuel
Recommended Fuel If the vehicle has the 6.2L V8 engine (VIN Code W), use premium unleaded gasoline with a posted octane rating of 91 or higher. You can also use regular unleaded gasoline rated at 87 octane or higher, but the vehicle's acceleration could be slightly reduced, and a slight audible knocking noise, commonly referred to as spark...
Page 284: California Fuel
9-50 Driving and Operating California Fuel Requirements If the vehicle is certified to meet California Emissions Standards, it is designed to operate on fuels that meet California specifications. See the underhood emission control label. If this fuel is not available in states adopting California Emissions Standards, the vehicle will operate satisfactorily on fuels meeting...
Page 285 For customers who do not use TOP TIER Detergent Gasoline regularly, one bottle of GM Fuel System Treatment PLUS, added to the fuel tank at every engine oil change, can help clean deposits from fuel injectors and intake valves. GM Fuel System Treatment PLUS is the only gasoline additive recommended by General Motors.
Page 286: Filling The Tank
9-52 Driving and Operating Filling the Tank WARNING Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the fuel pump island. Turn off the engine when refueling.
Page 287 There is also a manual fuel door release tab. It is located against the upper trim in the rear compartment on the driver side of the vehicle. Pull the tab to release the fuel door. To remove the fuel cap, turn it slowly counterclockwise.
Page 288: Filling A Portable Fuel
9-54 Driving and Operating WARNING If a fire starts while you are refueling, do not remove the nozzle. Shut off the flow of fuel by shutting off the pump or by notifying the station attendant. Leave the area immediately. If you need a new fuel cap, be sure to get the right type.
Page 289: Towing
Towing General Towing Information The vehicle is neither designed nor intended to tow a trailer. Conversions and Add-Ons Add-On Electrical Equipment Do not add anything electrical to the vehicle unless you check with your dealer first. Some electrical equipment can damage the vehicle and the damage would not be covered by the vehicle's warranty.
Page 290 9-56 Driving and Operating NOTES...
Page 291 Vehicle Care General Information General Information ..10-3 California Proposition 65 Warning ....10-3 California Perchlorate Materials Requirements .
Page 292 10-2 Vehicle Care Electrical System Electrical System Overload ....10-50 Fuses and Circuit Breakers ....10-51 Engine Compartment Fuse Block .
Page 293: Vehicle Care
General Information For service and parts needs, visit your dealer. You will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks: California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Page 294: Accessories And Modifications
10-4 Vehicle Care Accessories and Modifications Adding non dealer accessories to the vehicle can affect vehicle performance and safety, including such things as airbags, braking, stability, ride and handling, emissions systems, aerodynamics, durability, and electronic systems like antilock brakes, traction control, and stability control.
Page 295: Lifting The Vehicle
Make sure the jack you are using spans at least two crossmember ribs. Lift only in the areas shown in the following pictures. For additional information, see your dealer and the Chevrolet Corvette service manual.
Page 296 10-6 Vehicle Care Lifting From the Front The front lifting points can be accessed from either side of your vehicle, behind the front tires. 1. Locate the front lifting points (A), according to the illustration shown. 2. Be sure to place a block or pad between the jack and the vehicle.
Page 297 Lifting From the Rear The rear lifting points can be accessed from the rear of the vehicle, on either the driver's or passenger's side. 1. Locate the rear lifting points (A), according to the illustration shown. 2. Be sure to place a block or pad between the jack and the vehicle.
Page 298: Vehicle Checks
10-8 Vehicle Care Vehicle Checks Doing Your Own Service Work WARNING You can be injured and the vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it. Be sure you have sufficient knowledge, experience, the proper replacement parts, and tools before attempting...
Page 299: Hood
Hood To open the hood: 1. Pull the hood release lever with this symbol on it. It is located inside the vehicle below the instrument panel on the driver side. 2. Go to the side of the vehicle and pull up on the rear edge of the hood, near the windshield.
Page 300: Engine Compartment
10-10 Vehicle Care Engine Compartment Overview 6.2 L LS3 V8 Engine (Without dry sump engine oil tank)
Page 301 A. Clutch Master Cylinder Reservoir (If Equipped). See B. Windshield Washer Fluid Reservoir. See Adding Washer Fluid under C. Brake Fluid Reservoir. See Brake Fluid under D. Coolant Surge Tank and Pressure Cap. See Power Steering Fluid Reservoir. G. Engine Oil Fill Cap. See When to Add Engine Oil under H.
Page 302 10-12 Vehicle Care 6.2 L LS9 V8 Engine...
Page 303 A. Intercooler. See C. Power Steering Fluid Reservoir and Cap. See D. Coolant Surge Tank and Pressure Cap. See E. Windshield Washer Fluid Reservoir. See Adding Washer Fluid under Clutch Master Cylinder Reservoir (If Equipped). See G. Brake Fluid Reservoir. See Brake Fluid under H.
Page 304 10-14 Vehicle Care 6.2 L LS3 V8 Engine (With dry sump engine oil tank) or 7.0 L LS7 V8 Engine...
Page 305: Engine Oil
B. Power Steering Fluid Reservoir. D. Remote Positive (+) Terminal (Out of View). See E. Engine Oil Dipstick. See Checking Engine Oil under Dry Sump Engine Oil Tank. See Changing Engine Oil and Filter under G. Engine Oil Fill Cap. See When to Add Engine Oil under H.
Page 306 10-16 Vehicle Care Checking Engine Oil (Except ZO6, ZR1, and Grand Sport) If the CHECK OIL LEVEL message displays on the Driver Information Center (DIC), check the engine oil level right away. For more information, see . Check the engine oil level regularly; this is an added reminder.
Page 307 for additional information on engine oil. Do not add too much oil. Oil levels above or below the acceptable operating range shown on the dipstick are harmful to the engine. If you find that you have an oil level above the operating range, i.e., the engine has so much oil that the oil level gets above the cross-hatched...
Page 308 10-18 Vehicle Care This is normal since the dipstick is designed to read engine oil level only after the engine has run long enough to reach normal operating temperature. Do not add engine oil based on cold engine dipstick readings. The engine oil level on the dipstick will also be inaccurate if checked while the engine is running.
Page 309 for the location of the external engine oil tank and fill cap. Add enough oil to put the level somewhere in the proper operating range. Push the dipstick all the way back into the oil tank when through. Changing Engine Oil and Filter (ZO6, ZR1, and Grand Sport) These vehicles have a racetrack ready dry sump...
Page 310 10-20 Vehicle Care 8. Start the engine and let it run at idle for at least 15 seconds. This will circulate the fresh engine oil through the lubrication system. 9. Shut off the engine and check the oil level as described under Checking Engine Oil (ZO6, ZR1, and Grand Sport).
Page 311 Cold Temperature Operation: In an area of extreme cold, where the temperature falls below 29°C ( 20°F), an SAE 0W-30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Page 312: Engine Oil Life System
10-22 Vehicle Care Engine Oil Life System When to Change Engine Oil This vehicle has a computer that indicates when to change the engine oil and filter. This is based on engine revolutions and engine temperature, and not on mileage. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably.
Page 313: Automatic Transmission
Automatic Transmission Fluid How to Check Automatic Transmission Fluid It is not necessary to check the transmission fluid level. A transmission fluid leak is the only reason for fluid loss. If a leak occurs, take the vehicle to the dealer service department and have it repaired as soon as possible.
Page 314: Hydraulic Clutch
10-24 Vehicle Care Hydraulic Clutch It is not necessary to regularly check clutch fluid unless you suspect there is a leak in the system. Adding fluid will not correct a leak. A fluid loss in this system could indicate a problem. Have the system inspected and repaired.
Page 315: Scheduled Maintenance
When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/filter at the scheduled maintenance intervals and replace them at the first oil change after each 80 000 km (50,000 mi) interval. See for more information. If driving in dusty/dirty conditions, inspect the filter at each engine oil change.
Page 316 10-26 Vehicle Care 6.2 L V8 Engine LS3 Shown, 6.2 L V8 Engine LS9 and 7.0 L V8 Engine LS7 Similar A. Mass Air Flow Sensor Connector B. Connector Lock 4. Remove the connector lock (B) located at the bottom of the mass air flow sensor connector (A).
Page 317 6.2 L V8 Engine LS3 Shown, 6.2 L V8 Engine LS9 and 7.0 L V8 Engine LS7 Similar A. Screw B. Filter Cover C. Filter 7. To remove the filter from the LS3 and LS7 engines, remove the six screws (A) securing the filter cover (B) then pull away to gain access to the air filter (C).
Page 318: Cooling System
10-28 Vehicle Care Cooling System (Engine) The cooling system allows the engine to maintain the correct working temperature. 7.0L Engine shown, 6.2L Engine similar A. Electric Engine Cooling Fan B. Coolant Surge Tank with Pressure Cap WARNING An electric engine cooling fan under the hood can start up even when the engine is not running and can cause injury.
Page 319: (Intercooler)
Cooling System (Intercooler) The 6.2L LS9 supercharged V8 engine has an intercooler cooling system. See for location of the intercooler. The intercooler cooling system has a special procedure for draining and adding coolant. Because this procedure is difficult, see the dealer for service if the intercooler is low on coolant.
Page 320 10-30 Vehicle Care What to Use WARNING Adding only plain water or some other liquid to the cooling system can be dangerous. Plain water and other liquids, can boil before the proper coolant mixture will. The vehicle's coolant warning system is set for the proper coolant mixture.
Page 321: Checking Coolant
Checking Coolant The vehicle must be on a level surface when checking the coolant level. Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down.
Page 322 10-32 Vehicle Care How to Add Coolant to the Coolant Surge Tank WARNING You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine.
Page 323 3. Fill the coolant surge tank with the proper DEX-COOL coolant mixture until the level inside stabilizes at the FULL COLD mark on the front of the surge tank. 4. With the coolant surge tank pressure cap off, start the engine and let it run until the upper radiator hose can be felt getting hot.
Page 324: Engine Overheating
10-34 Vehicle Care Engine Overheating The vehicle has several indicators to warn of engine overheating. There is an engine coolant temperature gauge on the instrument panel cluster. See . The vehicle may also display a COOLANT OVER TEMPERATURE message on the Driver Information Center (DIC).
Page 325: Overheated Engine
WARNING (Continued) for information on driving to a safe place in an emergency. If No Steam is Coming from the Engine If an engine overheat warning is displayed but no steam can be seen or heard, the problem may not be too serious.
Page 326: Power Steering Fluid
10-36 Vehicle Care Driving extended distances in the overheat protection mode should be avoided. After driving in the overheated engine protection operating mode, to avoid engine damage, allow the engine to cool before attempting any repair. The engine oil will be severely degraded.
Page 327: Washer Fluid
What to Use To determine what kind of fluid to use, see . Always use the proper fluid. Use of the incorrect fluid may damage the vehicle and the damages may not be covered by the vehicle's warranty. Always use the correct fluid listed in Washer Fluid What to Use When the vehicle needs windshield...
Page 328: Brakes
10-38 Vehicle Care Brakes Brake Wear (Except ZR1 and ZO6) This vehicle has disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound can come and go or be heard all the time the vehicle is moving, except when applying the brake pedal firmly.
Page 329 Front Brake pads can be visually inspected through the wheel by inspecting the outer brake pads at each wheel. Brake pads should be replaced when worn to 2 mm of pad thickness. New pads are 10 mm thick. In addition, brake pad inspection is required any time the tires are removed.
Page 330 10-40 Vehicle Care Brake Rotor Protector WARNING Ceramic rotors will be very hot after operation and touching them may cause burns. Be sure brake system is completely cool prior to installation of protector, or coming in contact with them. Rotors may be chipped if hard contact is made with the wheel during wheel installation or removal.
Page 331: Brake Fluid
Replacing Brake System Parts The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. The vehicle was designed and tested with top-quality brake parts.
Page 332: Checking Brake Fluid
10-42 Vehicle Care WARNING If too much brake fluid is added, it can spill on the engine and burn, if the engine is hot enough. You or others could be burned, and the vehicle could be damaged. Add brake fluid only when work is done on the brake hydraulic system.
Page 333: Battery
Using the wrong fluid can badly damage brake hydraulic system parts. For example, just a few drops of mineral-based oil, such as engine oil, in the brake hydraulic system can damage brake hydraulic system parts so badly that they will have to be replaced. Do not let someone put in the wrong kind of fluid.
Page 334: Rear Axle
10-44 Vehicle Care Rear Axle When to Check Lubricant It is not necessary to regularly check rear axle fluid unless a leak is suspected or an unusual noise is heard. A fluid loss could indicate a problem. Have it inspected and repaired.
Page 335: Function Check
Automatic Transmission Shift Lock Control Function Check WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room around the vehicle.
Page 336: Wiper Blade Replacement
10-46 Vehicle Care Wiper Blade Replacement Windshield wiper blades should be inspected for wear and cracking. for more information. Replacement blades come in different types and are removed in different ways. For the proper type and length, see It is a good idea to clean or replace the wiper blade assembly every six months.
Page 337: Windshield Replacement
To install the new wiper insert: 1. Slide the insert (D), notched end last, into the end with the two blade claws (A). Slide the insert all the way through the blade claws at the opposite end (B). The plastic caps (C) will be forced off as the insert is fully installed.
Page 338: Headlamp Aiming
10-48 Vehicle Care Headlamp Aiming Headlamp aim has been preset at the factory and should need no further adjustment. However, if the vehicle is damaged in a crash, the headlamp aim may be affected. Aim adjustment to the low-beam headlamps may be necessary if oncoming drivers flash their high-beam headlamps at you (for vertical aim).
Page 339: Headlamps, Front Turn
Headlamps, Front Turn Signal and Parking Lamps A. High-beam Headlamp B. Low-beam Headlamp C. Front Parking/Turn Signal If the low-beam headlamp needs to be replaced, see your dealer. See for more information. To replace a high-beam or front parking/turn signal bulb: 1.
Page 340: Taillamps, Turn Signal, And Stoplamps
10-50 Vehicle Care Taillamps, Turn Signal, and Stoplamps To replace a stoplamp, taillamp/turn signal bulb: 1. Remove the screw from the top of the lamp assembly. 2. Tilt the lamp assembly toward you. 3. Turn the bulb socket one-quarter turn counterclockwise and pull it out.
Page 341: Fuses And Circuit
Fuses and circuit breakers protect the following in the vehicle: Headlamp Wiring Windshield Wiper Motor Power Windows and Other Power Accessories Replace a bad fuse with a new one of the identical size and rating. If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed.
Page 342: Engine Compartment Fuse Block
10-52 Vehicle Care Engine Compartment Fuse Block There is one fuse block in the engine compartment located on the passenger side of the vehicle. See for more information on location. Spilling liquid on any electrical component on the vehicle may damage it. Always keep the covers on any electrical component.
Page 343 Fuse Usage Antilock Brake System (ABS)/Real Time Damping Wiper Stoplamps/ Back-Up Lamps Oxygen Sensor Battery Main 5 Parking Lamps Powertrain Relay Input/Electronic Throttle Control Manual Transmission Solenoids Antilock Brake System Fuse Usage Odd Numbered Fuel Injectors Electronic Suspension Control (Option) Canister Purge Solenoid, Mass Air Flow Sensor...
Page 344 10-54 Vehicle Care J-Style Usage Fuses Cooling Fan Battery Main 3 Antilock Brake System Heating/Ventilation/ Air Conditioning Blower Battery Main 2 Starter Audio Amplifier Intercooler Pump Battery Main 1 Micro-Relays Usage Horn Conditioning Compressor Windshield Washer Micro-Relays Usage Parking Lamps, Foglamps Front Fog Lamp...
Page 345: Block
Instrument Panel Fuse Block The instrument panel fuse block is located on the passenger side of the vehicle, under the instrument panel and under the toe-board. Remove the carpet and toe-board covering to access the fuse block by pulling at the top of each corner of the panel.
Page 346 10-56 Vehicle Care Fuses Usage CRUISE Cruise Control SWTCH Switch CTSY/LAMP Courtesy Lamp DR LCK Door Locks DRIV DR Driver Door Switch SWITCH Engine Control Module (ECM) Exhaust Module (ZO6 & EXH MDL ZR1), Spare (Coupe and Convertible) GM LAN GM LAN Devices RUN/CRNK HTD SEAT/...
Page 347 Fuses Usage TONNEAU Tonneau Release RELSE Tonneau Pulldown Actuator Fuses Usage BLANK Blank BLANK Blank FUEL DR Fuel Door Release RELSE REAR/FOG Rear Fog Lamps TONNEAU Tonneau Release RELSE TRUNK Trunk Release RELSE Fuses Usage AUX PWR Auxiliary Power BLANK Not Used BLANK Not Used...
Page 348: Wheels And Tires
10-58 Vehicle Care Wheels and Tires Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your vehicle Warranty booklet for details. For additional information refer to the tire manufacturer.
Page 349: Winter Tires
Winter Tires Consider installing winter tires on the vehicle if frequent driving on snow or ice covered roads is expected. All season tires provide good overall performance on most surfaces, but they may not offer the traction or the same level of performance as winter tires on snow or ice covered roads.
Page 350: Low-Profile Tires
10-60 Vehicle Care The shorter the distance you drive and the slower the speed, the greater the chance that the tire will not have to be replaced. As soon as possible, contact the nearest authorized GM or run-flat servicing facility for inspection and repair or replacement.
Page 351: Tire Sidewall Labeling
If the vehicle has low profile tires, they are more susceptible to damage from road hazards or curb impact than standard profile tires. Tire and/or wheel assembly damage can occur when coming into contact with road hazards like, potholes, or sharp edged objects, or when sliding into a curb.
Page 352: Tire Designations
10-62 Vehicle Care (D) Tire Identification Number (TIN) The letters and numbers following the DOT code are the Tire Identification Number (TIN). The TIN shows the manufacturer and plant code, tire size, and date the tire was manufactured. The TIN is molded onto both sides of the tire, although only one side may have the date of manufacture.
Page 353: Tire Terminology And Definitions
(E) Rim Diameter Diameter of the wheel in inches. (F) Service Description These characters represent the load index and speed rating of the tire. The load index represents the load carrying capacity a tire is certified to carry. The speed rating is the maximum speed a tire is certified to carry a load.
Page 354 10-64 Vehicle Care DOT Markings A code molded into the sidewall of a tire signifying that the tire is in compliance with the U.S. Department of Transportation (DOT) Motor Vehicle Safety Standards. The DOT code includes the Tire Identification Number (TIN), an alphanumeric designator which can also identify the tire manufacturer, production plant, brand, and...
Page 355 Passenger (P-Metric) Tire A tire used on passenger cars and some light duty trucks and multipurpose vehicles. Recommended Inflation Pressure Vehicle manufacturer's recommended tire inflation pressure as shown on the tire placard. See Radial Ply Tire A pneumatic tire in which the ply cords that extend to the beads are laid at 90 degrees to the centerline of the tread.
Page 356: Tire Pressure
10-66 Vehicle Care Vehicle Maximum Load on the Tire Load on an individual tire due to curb weight, accessory weight, occupant weight, and cargo weight. Vehicle Placard A label permanently attached to a vehicle showing the vehicle capacity weight and the original equipment tire size and recommended inflation pressure.
Page 357 How to Check Use a good quality pocket-type gauge to check the tire pressure. Proper tire inflation cannot be determined by looking at the tire. Check the tire inflation pressure when the tires are cold, meaning the vehicle has not been driven for at least three hours or no more than 1.6 km (1 mi).
Page 358: Tire Pressure Monitor
10-68 Vehicle Care this high-speed driving, return the tires to the cold inflation pressure shown on the Tire and Loading Information label. See Example: You will find the maximum load and inflation pressure molded on the tire's sidewall, in small letters, near the rim flange.
Page 359: Tire Pressure Monitor
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
Page 360 10-70 Vehicle Care If the warning light comes on, stop as soon as possible and inflate the tires to the recommended pressure shown on the tire loading information label. See A message to check the pressure in a specific tire displays in the Driver Information Center (DIC).
Page 361 TPMS Malfunction Light and Message The TPMS will not function properly if one or more of the TPMS sensors are missing or inoperable. When the system detects a malfunction, the low tire warning light flashes for about one minute and then stays on for the remainder of the ignition cycle.
Page 362: Tire Inspection
10-72 Vehicle Care Tire Inspection GM recommends that the tires, including the spare tire, if the vehicle has one, be inspected for signs of wear or damage at least once a month. Replace the tire if: The indicators at three or more places around the tire can be seen.
Page 363: Buying New Tires
Treadwear indicators appear when the tires have only 1.6 mm (1/16 in) or less of tread remaining. See for more information. The rubber in tires ages over time. This also applies for the spare tire, if the vehicle has one, even if it is never used.
Page 364 10-74 Vehicle Care GM's exclusive TPC Spec system considers over a dozen critical specifications that impact the overall performance of your vehicle, including brake system performance, ride and handling, traction control, and tire pressure monitoring performance. GM's TPC Spec number is molded onto the tire's sidewall near the tire size.
Page 365: Different Size Tires And Wheels
WARNING Using bias-ply tires on the vehicle may cause the wheel rim flanges to develop cracks after many miles of driving. A tire and/or wheel could fail suddenly and cause a crash. Use only radial-ply tires with the wheels on the vehicle. If you must replace your vehicle's tires with those that do not have a TPC Spec number, make sure...
Page 366: Uniform Tire Quality
10-76 Vehicle Care Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the system developed by the United States National Highway Traffic Safety Administration (NHTSA), which grades tires...
Page 367: Wheel Alignment And Tire
Traction AA, A, B, C The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete.
Page 368: Wheel Replacement
10-78 Vehicle Care Wheel Replacement Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts, and wheel nuts should be replaced. If the wheel leaks air, replace it (except some aluminum wheels, which can sometimes be repaired).
Page 369 WARNING Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after a time. The wheel could come off and cause a crash. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle.
Page 370: Tire Chains
10-80 Vehicle Care Tire Chains WARNING Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts. The area damaged by the tire chains could cause you to lose control of the vehicle and you or others may be injured in...
Page 371 A rear blowout, particularly on a curve, acts much like a skid and may require the same correction you would use in a skid. In any rear blowout remove your foot from the accelerator pedal. Get the vehicle under control by steering the way you want the vehicle to go.
Page 372: Jump Starting
10-82 Vehicle Care Jump Starting For more information about the vehicle battery, see If your battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. WARNING Batteries can hurt you.
Page 373 3. Turn off the ignition on both vehicles. Unplug unnecessary accessories plugged into the cigarette lighter or the accessory power outlet. Turn off the radio and all lamps that are not needed. This will avoid sparks and help save both batteries. And it could save the radio! 4.
Page 374 10-84 Vehicle Care WARNING Using an open flame near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water.
Page 375 battery. It goes to a heavy, unpainted metal engine part or to a remote negative ( ) terminal on the vehicle with the dead battery. 9. Connect the other end of the negative ( ) cable at least 45 cm (18 inches) away from the dead battery, but not near engine parts that move.
Page 376: Towing The Vehicle
10-86 Vehicle Care To disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative ( ) cable from the vehicle that had the dead battery. 2. Disconnect the black negative ( ) cable from the vehicle with the good battery.
Page 377: Appearance Care
Appearance Care Exterior Care Silicone grease on weatherstrips will make them last longer, seal better, and not stick or squeak. Apply silicone grease with a clean cloth. During very cold, damp weather frequent application may be required. See Washing the Vehicle The best way to preserve the vehicle's finish is to keep it clean by washing it often.
Page 378 10-88 Vehicle Care Finish Care Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint finish. Approved cleaning products can be obtained from your dealer. If the vehicle has a basecoat/ clearcoat paint finish, the clearcoat gives more depth and gloss to the colored basecoat.
Page 379 ZR1 Hood Window The hood window on the ZR1 can be cleaned in the same manner as the headlamp lenses. See Cleaning Exterior Lamps/Lenses for more information. Windshield and Wiper Blades Clean the outside of the windshield with glass cleaner. Clean the rubber blades using a lint free cloth or paper towel soaked with windshield washer...
Page 380: Interior Care
10-90 Vehicle Care mud and debris can collect. Dirt packed in close areas of the frame should be loosened before being flushed. Your dealer or an underbody car washing system can do this. Underbody Maintenance Chemicals used for ice and snow removal and dust control can collect on the underbody.
Page 381 Lighter colored interiors may require more frequent cleaning. Use care because newspapers and garments that transfer color to home furnishings may also transfer color to the interior. When cleaning the interior, only use cleaners specifically designed for the surfaces being cleaned. Permanent damage may result from using cleaners on surfaces for which they were not intended.
Page 382 10-92 Vehicle Care Fabric/Carpet Use a vacuum cleaner with a soft brush attachment frequently to remove dust and loose dirt. A canister vacuum with a beater bar in the nozzle may only be used on floor carpet and carpeted floor mats. For any soil, always try to remove it first with plain water or club soda.
Page 383 Coated Moldings These moldings are around the hatch opening in the rear area. When lightly soiled, wipe with a sponge or soft lint-free cloth dampened with water. When heavily soiled, use warm soapy water. Leather Leather, and lighter colored leather in particular, will need more frequent cleaning to prevent the buildup of dust, dirt, and colors transferred...
Page 384 10-94 Vehicle Care commercial cleaners and coatings that are sold to preserve and protect soft plastic surfaces may permanently change the appearance and feel of the interior and are not recommended. Do not use silicone or wax-based products, or those containing organic solvents to clean the interior because they can alter the appearance by increasing the gloss in a...
Page 385: Floor Mats
Floor Mats WARNING If a floor mat is the wrong size or is not properly installed, it can interfere with the accelerator pedal and/or brake pedal. Interference with the pedals can cause unintended acceleration and/or increased stopping distance which can cause a crash and injury.
Page 386 10-96 Vehicle Care NOTES...

This manual is also suitable for:

2011 corvette

Chevrolet 2011 Corvette Coupe Owner's Manual

Restraints

Instruments and Controls

Driving and Operating

General Information

Quick Links

Chapters

Related Manuals for Chevrolet 2011 Corvette Coupe

Summary of Contents for Chevrolet 2011 Corvette Coupe