Checking Brake Fluid - Chevrolet 2011 Corvette Coupe Owner's Manual

10-42 Vehicle Care
WARNING
If too much brake fluid is added, it
can spill on the engine and burn,
if the engine is hot enough. You
or others could be burned, and
the vehicle could be damaged.
Add brake fluid only when work
is done on the brake hydraulic
system. See Checking Brake
Fluid in this section.
Refer to the Maintenance Schedule
to determine when to check the
brake fluid. See

Checking Brake Fluid

Check brake fluid by looking at the
brake fluid reservoir. See
The fluid level should be above
the MIN mark on the reservoir. If it
is not, have the brake hydraulic
system checked to see if there is
a leak.
After work is done on the brake
hydraulic system, make sure the
level is between the MIN and MAX
marks.
.
.
What to Add
Use only new DOT 3 brake fluid
from a sealed container. See
Always clean the brake fluid
reservoir cap and the area around
the cap before removing it. This
helps keep dirt from entering the
reservoir.
WARNING
With the wrong kind of fluid in
the brake hydraulic system, the
brakes might not work well. This
could cause a crash. Always use
the proper brake fluid.
.