Dsp System; Spectrum Analyzer Select - Kenwood DPX-MP4050B Instruction Manual

Adjustment Item Display
Balance "BAL"
Fader "FAD"
Non Fader Output "N-F"
4
Exit the Audio Control mode
Press the [AUD] button.

DSP System

Setting the simulated Sound field effects of Digital Signal
Processor.
1
Enter the DSP Control mode
Press the [DSP] button.
"DSP mode" is displayed.
2
Select the Sound field effects
Press the [DSP] button.
Each time the button is pressed, the Sound field effects switch
as shown below:
Sound field effects
Stadium
Concert Hall
Club
Church
Studio
Bypass
When operation stops for 10 seconds, the DSP Control mode
closes.
Turn DSP System OFF
Press the [DSP] button for at least 1 second.
"DSP" indicator is OFF.
Range
Left 15 — Right 15
Rear 15 — Front 15
On/Off
Display
"Stadium"
"Concert"
"Club"
"Church"
"Studio"
"Bypass"
— 11 —

Spectrum Analyzer Select

Selecting the Spectrum Analyzer display.
1
Enter the Spectrum Analyzer Select mode
Press the [S.A] button for at least 1 second.
"SPEANA" is displayed.
2
Select the Spectrum Analyzer
Press the [S.A] button.
Each time the button is pressed, the Spectrum Analyzers switch
as shown below:
Spectrum Analyzer
Scan of Spectrum Analyzer
Spectrum Analyzer 1 — 9
Sea Shore
Spectrum Analyzer Off
Scan of Spectrum Analyzer:
The display switches from
and Sea Shore in sequence.
3
Exit the Spectrum Analyzer Select mode
Press the [S.A] button for at least 1 second.
When operation stops for 10 seconds, Spectrum Analyzer at that
time is registered and the Analyzer Select mode automatically
closes.
Display
"S.A Scan"
"SPEANA 1" — "SPEANA 9"
"Seashore"
"S.A Off"
Spectrum Analyzer
1 to 9