Illumination Color Mode; Contrast Adjustment; Touch Sensor Tone; Switching Preout - Kenwood DPX-MP4050B Instruction Manual

Function Set
<In ALL OFF Mode>

Illumination Color Mode

Setting the Illumination Color Mode of your display.
Display Setting
"COL Sync" The color of your display changes from one color to
another during volume adjustment and during
Attenuator being ON.
"COL Fix" Fix the color set.

Contrast Adjustment

Adjusting the display contrast.
Display and Setting
"CONT 1"
"CONT 7" (Original setting)
"CONT 11"

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"BEEP On"
"BEEP Off"
Setting
Beep is heard.
Beep canceled.
— 24 —

Switching preout

Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display
"Pout R"
"Pout N-F"

Opening Demonstration

Setting the Demonstration when Power is turned ON.
Display Setting
"Open On" Demonstration is carried out when Power is
turned ON.
"Open Off" Demonstration is not carried out when Power is
turned ON.

Equalizer mode

Setting the method of adjusting Equalizer types.
1
Select Equalizer mode
Press the [FM] or [AM] button.
Select the "EQ" display.
2
Select the method of adjusting Equalizer types
Press the [4] or [¢] button for at least 1 second.
Each time the button is pressed for at least 1 second, method of
adjusting Equalizer type switches as shown below:
Setting
Rear preout.
Non-fading preout.