Table of Contents
Advertisement
Clock Display
Display the time.
Switching to Time Display:
Keep pressing the CLK button until the clock is displayed.
Adjusting Time
Adjust the time.
Function of the KDC-S3007
Disabled System Indicator (DSi)
A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves. The factory default for
this function is ON.
Turning Disabled System Indicator On/Off:
Turn the power of the unit off.
2 While pressing buttons #1 and #3 at the same time, press the
TUN button.
Repeat steps 1 and 2 above to turn DS! back on.
Function of the KDC-S3007
Theft Deterrent Faceplate
a:
.
Grooves
Rejease button
|
2:15 read
Removing the Faceplate:
Press the release button.
The faceplate is unlocked, allowing you to detach it.
.
7
7 re i "D)
* Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places with
too much dust or the possibility of water splashing.
Reattaching the Faceplate:
1 Align the proyections on the unit with the grooves on the
faceplate
2
Push the faceplate in uotihit clicks.
The faceplate 1s locked in place, allowing you to use the unit.
Advertisement
Table of Contents
