Clean Reception System Circuit (Crsc); Station Name Preset (Snps) - Kenwood KDC-3011 Instruction Manual

Tuner features
Clean Reception System Circuit (CRSC)
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
The factory default for this function is ON.
Turning CRSC On/Off:
1 Press the MENU button for at least one second.
"MENU' is displayed and the menu mode is turned on.
2 Keep pressing the RI button until the Clean Reception System
Circuit function appears in the display.
Press the é<@ button to search in the other direction.
The function setting is indicated by "CRSC ON" or "CRSC OFF"
in the display, indicating that the CRSC is on or off,
respectively.
3 Switching settings
Press either the AM or FM button.
The display and setting will change.
4 Press the MENU button to end the menu mode.
Strong electrical fields (such as from power lines} may cause
unstable sound quality when CRSC. is turned on. In such a
situation, turn it off.
Station Name Preset (SNPS)
You can assign names to radio stations with the Station Preset .
Memory. Up to 32 FM stations and 16 AM stations can be
assigned names.
1 Adjust the frequency to the station whose name you want to
enter.
2 Press the NAME.S button for at least two seconds.
"NAME SET" is displayed once the station name preset faba
is entered.
_ . The cursor will blink in the position where letters are entered.
3. Press either the Hed OF PPI button to move the cursor to the
—12— |
desired position.
The 4 button moves the cursor to the left, and the >>»
button to the right.
You can also move the cursor left or right by pressing the ke<
or >I buttons, respectively, on the remote.
4 Press the FM or AM button to display the desired character.
Characters that can be displayed are as follows.
Alphabet : A ~ Z
Numerals and symbols :1~90@"'*%&*+4+-=,./\<>[]
5 Continue steps 3 and 4 until all the characters are chosen for
the name.
You can enter up to 8 characters for each name.
6 «Assigning Names
Press the NAME.S button on the unit or the OK button on the
remote.
The name of the station is stored in memory, and the Station
Name Preset mode ends.
¢ Assigning Name and Storing Frequency with Station Preset
Memory
Press the desired preset button for at least two seconds.
The name of the station is stored and the frequency for the
current station is stored in the selected preset button. The
Station Name Preset mode ends.
Also, if you make no input for 10 seconds, the name will be
stored up to the point that you have entered, and the mode
ends.
e You can assign names to up to 32 FM stations. and 16 AM
stations.
¢ All the station names will be erased if you press the RESET
button.
© If you want to change the name of a station, first display the
name of the station (following steps 1 and 2 above), then
change the letter(s) that you want by following steps 3 and 4.