About Cds; About Cassette Tape - Kenwood DPX-MP4050B Instruction Manual

About CDs

Handling CDs
• Don't touch the recording surface of the CD.
• CD-R and CD-RW are easier to damage than
a normal music CD. Use a CD-R or a CD-RW
after reading the caution items on the
package etc.
• Don't stick tape etc. on the CD.
Also, don't use a CD with tape stuck on it.
When using a new CD
If the CD center hole or outside rim has burrs,
use it after removing them with a ball pen etc.
Burrs
CD accessories
Don't use disc type accessories.
CD cleaning
Clean from the center of the disc and move
outward.
Removing CDs
When removing CDs from this unit pull them
out horizontally.
CDs that can't be used
• CDs that aren't round can't be used.
• CDs with coloring on the recording surface
or that are dirty can't be used.
• This unit can only play the CDs with
.
Burrs
It may not correctly play disks which do not
have the mark.
• A CD-R or CD-RW that hasn't been finalized
can't be played. (For the finalization process
refer to your CD-R/CD-RW writing software,
and your CD-R/CD-RW recorder instruction
manual.)
CD storage
• Don't place them in direct sunlight (On the
seat or dashboard etc.) and where the
temperature is high.
• Store CDs in their cases.
— 5 —

About Cassette tape

Cleaning the tape head
When there's noise or the sound quality is bad
during tape play the tape head maybe dirty,
clean the tape head.
About Cassette tape
• If the tape is slack tighten it.
• If the cassette tape label is peeling off glue it
on again.
• Don't use deformed cassette tape.
• Don't place cassette tape on the dashboard
etc. where the temperature is high.
• Don't use cassette tape that's 100 minutes
long or longer.