Replacing The Battery; Warranty - Greenlee 6711 Operation, Service And Parts Instruction Manual

REPLACING THE BATTERY

WARNING
Always disconnect both test probes before replacing the battery.
Electric shock or damage to tester may result.
1. Disconnect both test probes from circuit being tested.
2. Position tester face down on a clean, flat surface.
3. Open battery door, using a small slot-head screwdriver. Lift out the
battery holder and carefully unsnap battery from connector.
4. Install a new 9 V battery by snapping connector to battery top.
5. Replace the battery in the tester, checking wires so that they will
not be pinched when battery door is closed.
6. Close battery door.
Please think of our environment when you dispose of your used
batteries.
Batteries may leak if the tester is unused for long periods of time.
Severe damage may result. Always remove batteries if the unit will not
be used soon.

WARRANTY

The 6711 Digital Voltage Tester has a limited lifetime warranty. Greenlee warrants to the original purchaser
for use that Greenlee 6711 Digital Voltage Tester by Greenlee Textron Inc., will be free from defects in
workmanship and material for the useful life of the tool, excepting abuse and normal wear. This warranty
does not cover damage due to tampering, misuse, loss, unauthorized alterations or repairs. To avoid service
charges, always check battery before sending tester in for warranty service or repair.
Should the 6711 Digital Voltage Tester fail due to defective materials and/or workmanship during the
warranty period, return it to:
Greenlee Textron Inc.
Attn.: Instrument Repair
4411 Boeing Drive
Rockford, IL USA 61109
(815) 397-7070
The above limited warranty covers repair and replacement of the instrument only. No other obligation is
stated or implied.
For additional copies of this manual at no extra charge, write Greenlee Textron Inc., 4455 Boeing Drive,
Rockford, IL USA 61109 or send fax to (815) 397-1865.
6711 Digital Voltage Tester
Battery
BATTERY
Battery Cover
BATTERY COVER
9