Table of Contents
Advertisement
Basic Recording
You can record a TV show in
progress by inserting a blank
tape and pressing the Record
button. You can even add time
in fixed 30-minute increments
by pressing the Record button
repeatedly.
Note: Be sure your videotape
has a Record Safety Tab. If the
tab is missing, you can cover
the opening with a small piece
of tape. Warning: Do not cover
this opening unless you are
sure you want to record over
the tape.
Record Safety Tab
1
Insert Tape
Insert a blank VHS tape into either deck.
2
Select a Channel to Record
Use the 0–9 buttons or the Channel Up/
Down arrow keys to select the desired
channel.
3
Start Recording
Press the Record button. For options while
a recording is in progress, see Recording
Options on the next page.
Notes:
• Be sure the TV is set to channel 3 or 4
(whichever the switch is set to on the
back of the VCR).
• Make sure the TV/VCR button on the
front panel is set to VCR (the VCR icon
will appear on the front panel display).
• Be sure the tape is long enough to record
the entire program. To change the
recording speed, see page 56.
7 - Recording Features
Hi-Fi
Deck
Power
Stop / Eject
Pause
Rewind
Play
F. Forward
Record
Deck Select
Hi-Fi
Deck
Copy
Tape
53
7 - RECORDING FEATURES
Advertisement
Table of Contents
