Show Weak Channels - Go-Video DDV9755 User Manual

Show Weak Channels disables
the blue screens that normally
appear when you select a
channel with weak reception.
If you manually add a channel
that Auto Channel Search
missed, you will want to set
Show Weak Channels to "Yes"
so you can view the channel
instead of a blue screen.
1 Open "Setup Menu"
Press and hold the Menu button for 3 seconds.
2
Select "Tuner & Channel List"
Press 3.
3
Select "Show Weak Channels"
Press the down arrow until Show Weak
Channels is selected.
4
Set "Show Weak Channels"
Press the right arrow repeatedly to set Show
Weak Channels to "Yes" or "No." If you
choose "Yes," return to page 32 and run Auto
Channel Search again.

Show Weak Channels

AUDIO DUB VIDEO DUB
1
2 : Copy/Record Settings
REPEAT SKIP 3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
6 : VCR Plus Setup
7 : Advanced Features
____________________________________
/
____________________________________
/
AUDIO DUB VIDEO DUB
REPEAT SKIP
____________________________________
/
AUDIO DUB VIDEO DUB
REPEAT SKIP
____________________________________
/
4 - TUNER AND CHANNEL LIST
SETUP MENU
Set Clock Menu
= Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
= Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
Show Weak Channels No
Tuner Audio Stereo
= Move = Sel MENU=Quit
TUNER AND CHANNEL LIST
CH ##
Tuner Band Auto
Auto Channel Search
Add Channel
Remove Channel
No
Show Weak Channels No
Yes
Tuner Audio Stereo
= Move = Sel MENU=Quit
35