There are two methods of
copying a tape from Deck 1 to
Deck 2: HQ1 (High Quality 1)
and HQ2 (High Quality 2).
HQ1 is best if your source tape
is recorded in SP. HQ2 is best
if your source tape is recorded
in LP or SLP. The Auto setting
will make this choice for you.
1
Open "Setup Menu"
Press and hold the Menu button for 3 seconds.
2
Select "Copy/Record Settings"
Press 2.
3
Set "Copy Mode"
Press 1 to choose from the following options:
• Auto — Sets the Copy Mode automatically.
• HQ1 — Copies in High Quality 1 mode, the
best choice if your source tape is recorded in
Standard Play (SP) mode.
• HQ2 — Copies in High Quality 2 mode, the
best choice if your source tape is recorded in
Long Play (LP) or Super Long Play (SLP)
mode.
Copy Mode
AUDIO DUB
VIDEO DUB
1
2 : Copy/Record Settings
REPEAT
SKIP
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
6 : VCR Plus Setup
7 : Advanced Features
____________________________________
1
2 : Speed Matching
3 : Copy Audio Insert
4 : Date/Time Stamp
5 : Deck1 Rec Source
6 : Deck2 Rec Source
7 : Record Mode
____________________________________
1
2 : Speed Matching
3 : Copy Audio Insert
4 : Date/Time Stamp
5 : Deck1 Rec Source
6 : Deck2 Rec Source
7 : Record Mode
____________________________________
SETUP MENU
Set Clock Menu
/
= Move
= Sel
MENU=Quit
COPY AND RECORD SETTINGS
Copy Mode
Auto
On
Off
Timer
Auto
Auto
Normal
/
= Move
= Sel
MENU=Quit
COPY AND RECORD SETTINGS
Auto
Copy Mode
Auto
HQ1
On
HQ2
Off
Timer
Auto
Auto
Normal
/
= Move
= Sel
MENU=Quit
41
5 - COPY FEATURES