Cable Box Control uses a
special "Cable Mouse" that
automatically selects channels
on your cable box when Timer
Recording. Once you attach
the Cable Mouse, you will
need to activate Cable Box
Control in the menu system,
then program the 2-digit code
for your specific brand of
Cable Box.
1
Plug In Cable Mouse
Plug the supplied Cable Mouse into the Cable
Box Control jack on the back of your Dual-
Deck VCR.
2
Peel Off Tape Covering
Peel off the tape covering from the bottom of
the Cable Mouse.
3
Attach Cable Mouse
Position the Cable Mouse on the top of the
Cable Box directly over the IR (Infrared)
sensor. Make sure the front half of the Cable
Mouse extends over the front of the Cable Box
(see diagrams at right).
Cable Box Control
12 - ADVANCED CONNECTIONS
95