Table of Contents
Advertisement
Record Features
On-Screen Display for
One-Touch Recordings
Recording a TV Program
Your Dual-Deck VCR offers a variety of recording options,
including One-Touch, Sequential, Loop and Timer Recording.
To record a TV program:
1
Insert a blank tape into either deck.
2
Select the channel you want to record by pressing the
Up/Down buttons on the remote control (or cable
CHANNEL
converter box if you have one).
3
Press
to begin recording.
RECORD
While you are recording the TV show, you can:
• Pause the recording by pressing
ing by pressing
(to resume recording, press
STOP
• Watch a different channel by pressing
your TV's tuner to select the new channel.
• Watch a video by inserting a tape in the opposite deck and
switching the
button to that deck.
TV VIEW
• Add recording time in half-hour increments with One
Touch Recording (see below).
One Touch Recording
Use One-Touch Recording (OTR) to record in 30 minute
increments up to 9 hours and 30 minutes.
1
Press
to start recording.
RECORD
2
Press
again to enter OTR mode (OTR 0:30 will
RECORD
appear on the On-Screen Display).
3
Keep pressing
to add 30-minute increments to the
RECORD
total recording time up to 9:30.
4
When the record time has elapsed, the deck
will stop automatically. If the
pushed during
I
OTR, the VCR
f you push
will turn off
OTR 9:30, the VCR goes into LOOP
upon completion
mode, which allows the VCR to
of recording.
record in a continuous loop (see p.29).
C H A P T E R
or stop the record-
PAUSE
RECORD
, then use
TV/VCR
key is
POWER
one time beyond
RECORD
CHAPTER 6 - RECORD FEATURES
6
).
27
Advertisement
Table of Contents
