Sequential/Loop Recording - Go-Video DDV9755 User Manual

Sequential/Loop Recording

You can insert two tapes in
your Dual-Deck VCR and have
them record sequentially or in
a continuous loop. This will
allow you to record up to 18
hours of programming in SLP
mode. Loop recording is useful
for continuous recording of
security cameras.
58 - '
DUAL DECK USER S GUIDE
1
Open "Setup Menu"
Press and hold the Menu button for 3 seconds.
2
Select "Copy/Record Settings"
Press 2.
3
Set "Record Mode"
Press 7 to select from the following options:
• Normal — Tapes record normally (default
setting).
• Sequential — When the tape in Deck 1
finishes recording, the tape in Deck 2 will
begin recording automatically.
• Loop — When the tape in Deck 1 finishes
recording, the tape in Deck 2 will begin
recording automatically and Deck 1 will
rewind. When the tape in Deck 2 finishes
recording, the tape in Deck 1 will record
again. This process will repeat continuously
until you press Stop on the recording deck.
AUDIO DUB VIDEO DUB
1
2 : Copy/Record Settings
REPEAT SKIP 3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
6 : VCR Plus Setup
7 : Advanced Features
____________________________________
/
COPY AND RECORD SETTINGS
1
2 : Speed Matching
3 : Copy Audio Insert
4 : Date/Time Stamp
5 : Deck1 Rec Source
6 : Deck2 Rec Source
7 : Record Mode
____________________________________
/
COPY AND RECORD SETTINGS
1 : Copy Mode
2 : Speed Matching
3 : Copy Audio Insert
4 : Date/Time Stamp
5 : Deck1 Rec Source
6 : Deck2 Rec Source
7
____________________________________
/
SETUP MENU
Set Clock Menu
= Move = Sel MENU=Quit
Copy Mode Auto
On
Off
Timer
Auto
Auto
Normal
= Move = Sel MENU=Quit
Auto
On
Off
Timer
Auto
Auto
Normal
Record Mode Normal Sequential
Loop
= Move = Sel MENU=Quit