Copy Mode - Go-Video DDV9485 User Manual

There are two methods of
copying a tape from Deck 1 to
Deck 2: HQ1 (High Quality 1)
and HQ2 (High Quality 2).
HQ1 is best if your source tape
is recorded in SP. HQ2 is best
if your source tape is recorded
in LP or SLP. The Auto setting
will make this choice for you.
1
Open "Setup Menu"
Press and hold the Menu button for 3 seconds.
2
Select "Copy/Record Settings"
Press 2.
3
Set "Copy Mode"
Press 1 repeatedly to set Copy Mode to:
• Auto — Automatically sets the Copy Mode.
• HQ1 — High Quality 1. Best if source tape is
in SP.
• HQ2 — High Quality 2. Best if source tape is
in LP or SLP.

Copy Mode

SETUP MENU
1 Set Clock Menu
2 : Copy/Record Settings
3 : Tuner And Channel List
4 : Dual-Deck Features
5 : Reset Factory Settings
____________________________________
/ = Move = Sel MENU=Quit
COPY AND RECORD SETTINGS
1 Copy Mode Auto
2 : Speed Matching On
3 : Copy Audio Insert Off
4 : Date/Time Stamp Timer
5 : Deck2 Rec Source Auto
____________________________________
/ = Move = Sel MENU=Quit
COPY AND RECORD SETTINGS
Auto
1 Copy Mode Auto
HQ1
2 : Speed Matching On
HQ2
3 : Copy Audio Insert Off
4 : Date/Time Stamp Timer
5 : Deck2 Rec Source Auto
____________________________________
/ = Move = Sel MENU=Quit
39
COPY FEATURES