Tv Tuner Settings; Tv Signal; Auto Channel Search - GoVideo VR1940 User Manual

TV Tuner Settings

TV Signal

Specifies whether the DVD Recorder+VCR
is connected to an antenna or cable TV
source.
1
Press SETUP.
2
Select TV Tuner > TV Signal
3
Choose from the following:
Antenna - Select if the DVD
Recorder+VCR is connected to an
antenna.
Cable - Select if the DVD
Recorder+VCR is connected to a cable
TV source.

Auto Channel Search

Automatically searches for all available
TV stations from antenna or cable TV.
1
Press SETUP.
2
Select TV Tuner > Utilities > Start
Scan.
• The DVD Recorder+VCR searches
for all available stations.This may
take several minutes to complete.
• When finished, press SETUP to exit.
Add/Delete Channels
Allows you to manually add or remove
channels.
1
Press SETUP.
2
Select TV Tuner > Utilities >
Add/Delete.
• If you are using a cable box or satellite receiver, you do not
need to adjust these settings.
S S
ETUP ETUP
TV Signal
System
Utilities
Clock
Language
Playback
CH:15
Record
Audio
TV Tuner
Exit
3
Add or delete channels:
• Use  to select the desired
channel.
• Press ENTER to add or delete the
channel.
• When finished, select Exit and press
ENTER.
Swap Channels
Allows you to swap the TV channel order
stored in the DVD Recorder+VCR to
match the channel order stored in your
TV set.
1
Press SETUP.
2
Select TV Tuner > Utilities > Swap.
3
Select the channel to be swapped,
and press ENTER.
4
Select the new channel position, and
press ENTER.
• The channels will swap positions.
• Repeat as necessary.
• When finished, select Exit and press
ENTER.
Cable Start Scan
- - - - - - - - - Add/Delete
Swap
SETUP
ENTER
����� ����
���������� ����
3 - Setup
29