Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for GoVideo DV1130
Summary of Contents for GoVideo DV1130
- Page 1 DV1130 User's Guide...
-
Page 2: Safety Precautions
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. -
Page 4: Table Of Contents
Table of Contents Introduction Safety Precautions ......2 IMPORTANT SAFETY INSTRUCTIONS ..3 Table of Contents . -
Page 5: Before Use
Before Use Playable Discs (8 cm/12 cm disc) Audio CD (8 cm/12 cm disc) In addition, this unit can play CD-Rs or CD-RWs that contain audio titles, MP3, JPEG, or WMA files. otes – Depending on the conditions of the recording equipment or the CD-R/RW disc itself, some CD-R/RW discs cannot be played on the unit. -
Page 6: Precautions
Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. -
Page 7: Front Panel Controls
Front Panel Controls DVD EJECT ( Z Z ) Opens or closes the disc tray to load or unload discs. Remote Sensor Point the remote control here. Disc Tray (DVD deck) Insert a disc here. CH (v v /V V ) Scans up or down through memorized channels. -
Page 8: Front Panel Display
Front Panel Display Lights when the DVD deck is selected. Lights when a disc is loaded in the DVD deck, and flashes when no disc is loaded. Indicates the total playing time, elapsed time, remaining time or current deck status (Playback, Pause, etc). Indicates Repeat mode is active. -
Page 9: Remote Control
Remote Control DVD & VCR select buttons Sets the remote control to operate either the DVD deck or the VCR deck. POWER Turns the DVD+VCR ON and OFF. TV/VCR Switches between your TV tuner and the DVD+VCR tuner. DISPLAY Accesses the on-screen display. Switches among the clock, tape counter and tape remaining modes on the display. -
Page 10: Connections Panel
Connections Panel DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connects to a TV with video and audio inputs. VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connects to the audio/video output of an external source (audio system, TV/monitor, another VCR). S-VIDEO OUT (DVD OUT) Connects to an S-Video Input on your TV. -
Page 11: Connections
Connections For instructions on the various ways to connect the DVD+VCR to your TV and other equipment, please refer to pages 11-14. Please refer to the manuals of your TV, VCR, stereo system or other devices as necessary to make the best connec- tions. -
Page 12: Basic Tv Connections
Connections (Continued) Basic TV Connections Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on your TV using the supplied 75-ohm coaxial cable (R). -
Page 13: Optional, Preferred Tv Connections
Connections (Continued) Optional, Preferred TV Connections otes The connections described below are for DVD play- back ONLY. When using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, set the video output select switch to COMPONENT. When using the S-VIDEO OUT jack, set the video output select switch to S-VIDEO. -
Page 14: Optional, Preferred Tv Connections
Connections (Continued) Optional, Preferred TV Connections You can ONLY listen to DVD playback using the COAX- IAL (X), OPTICAL (O) and AUDIO OUT (A2) connec- tions. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.) Connecting to an Amplifier Equipped with 2- Channel Analog Stereo or Dolby Surround... -
Page 15: Vcr Operation Setup
VCR Operation Setup On-Screen Display (OSD) The OSD provides feedback during VCR operation. ❶ ❷ ❸ ❹ PLAY HI-FI CH 4 STEREO JUL 5 , SAT 2:15 PM ❻ ❼ ❶ TAPE SPEED DISPLAY Shows the current tape speed. ❷ FUNCTION DISPLAY Indicates the function in progress. -
Page 16: Vcr Setup Menu Options
VCR Operation Setup (Continued) VCR Setup Menu Options Press MENU to display the MAIN menu. Use v v /V V to select the SETUP menu, then press ENTER. The SETUP menu will appear. Use v v /V V to choose the desired option on the SETUP menu, then use b b /B B to choose the desired setting. -
Page 17: Setting The Clock
VCR Operation Setup (Continued) Setting the Clock The DVD+VCR gives you two ways to set the time and date: 1) Auto Clock Set, or 2) Manual Clock Set. The Auto Clock Set feature enables the DVD+VCR to set the clock while the DVD+VCR is turned off. Things to know before starting The clock uses the 12-hour system. -
Page 18: Dvd Operation Setup
DVD Operation Setup General Explanation This manual provides general instructions for operating the DVD+VCR. Some DVDs have special requirements or allow only limited operations during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD+VCR or is not available on the disc. -
Page 19: Initial Settings
DVD Operation Setup (Continued) Initial Settings You can set your personal preferences for DVD+VCR operation. General Operation Press SETUP. The setup menu appears. Disc Audio Original Disc Subtitle English Disc Menu French Rating German Country Code Spanish TV Aspect Italian Menu Language Chinese Progressive Scan... -
Page 20: Sound
DVD Operation Setup (Continued) Sound Digital Audio Output Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you have connected the DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). -
Page 21: Parental Control
DVD Operation Setup (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs. -
Page 22: Vcr Operation
VCR Operation Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. Set the DVD+VCR source to VCR as shown in “Selecting the Viewing Source”... -
Page 23: Normal Recording
VCR Operation (Continued) Normal Recording Preparation: Turn on the power on both the DVD+VCR and TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. -
Page 24: Timer Recording
VCR Operation (Continued) Use V V to choose the SPEED option. 1 1 0 0 Use b b /B B to choose the desired recording speed (AUTO, SP or EP). AUTO mode determines how much tape is left and automatically switches from SP to EP, if necessary, to complete recording of the program. -
Page 25: Instant Timer Recording
VCR Operation (Continued) Instant Timer Recording Instant Timer Recording allows you to easily make a recording of a preset length without using the program- mable timer. Preparation: Turn on the power on both the DVD+VCR and the TV. Be sure the TV is tuned to the DVD+VCR output channel (3 or 4). If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. -
Page 26: Vhs Hi-Fi Stereo System/Mts Broadcast
VCR Operation (Continued) VHS Hi-Fi Stereo System/ MTS Broadcast The DVD+VCR is equipped with a VHS Hi-Fi audio sound system for recording and playback. The informa- tion below gives a brief description of Hi-Fi audio and how to record and play tapes in Hi-Fi audio mode. Playback with Hi-Fi Stereo Audio Sound A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for true stereo playback. -
Page 27: Tape Counter Memory Feature
VCR Operation (Continued) Tape Counter Memory Feature Real-Time Counter The tape counter shows length of tape in hours, min- utes, and seconds. Press CLK/CTR to select the real- time counter display. Every press of CLK/CTR changes the TV screen as shown below. -
Page 28: Dvd Operation
DVD Operation Playing DVDs Playback Setup Turn on the TV and select the video input source con- nected to the DVD+VCR. Audio system: Turn on the audio system and select the input source connected to the DVD+VCR. Set the DVD+VCR output source to DVD as shown in “Selecting the Viewing Source”... -
Page 29: Still Picture And Frame-By-Frame Playback
DVD Operation (Continued) General Features (Continued) Still Picture and Frame-by-Frame Playback 1 Press PAUSE/STEP (X) during playback. The DVD+VCR will go into Pause mode. 2 With a DVD, you can advance the picture frame by frame by pressing PAUSE/STEP (X) repeatedly on the remote control. -
Page 30: Marker Search
DVD Operation (Continued) General Features (Continued) Marker Search MARKER SEARCH You can start playback from a bookmarked point on your disc. Up to nine points can be memorized. To enter a mark, follow these steps. 1 During disc playback, press MARK when playback reaches the point you want to bookmark. -
Page 31: Audio Cd Operation
Audio CD Operation Playing an Audio CD Insert an Audio CD and close the tray. The Audio CD menu appears on the TV screen. Program TRACK 1 TRACK 2 TRACK 3 TRACK 4 TRACK 5 TRACK 6 TRACK 7 Clear All TRACK 8 0:56:35 STER. -
Page 32: Mp3 Disc Operation
MP3 Disc Operation Playing MP3 Discs The DVD Player can play MP3 formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3 recordings, read the “Notes on MP3 Discs” at right. Insert an MP3 disc and close the tray. The MP3/JPEG/WMA selection menu appears on the TV screen. -
Page 33: Jpeg Disc Operation
JPEG Disc Operation Viewing JPEG Files on a Disc The DVD+VCR can play discs with JPEG files. Make sure the resolution of the JPEG files is less than 2 megapixels (2M). otes Depending upon the size and number of the JPEG files, it could take a long time for the DVD player to read the disc’s contents. -
Page 34: Wma Disc Operation
WMA Disc Operation Playing WMA Discs The DVD Player can play WMA formatted recordings on CD-ROM, CD-R, or CD-RW discs. Insert a disc and close the tray. The MP3/JPEG/WMA selection menu appears on the TV screen. JPEG Use v/V to select WMA, then press ENTER. The WMA menu appears on the TV screen. -
Page 35: Programmed Playback
Programmed Playback Programmed Playback with Audio CD, MP3, JPEG and WMA Discs JPEG Program allows you to store your favorite tracks (or files) for a particular disc in the player memory. A program can contain up to 32 tracks (Audio CD) or 60 tracks (MP3/JPEG/WMA disc). -
Page 36: Troubleshooting
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom The power cord is disconnected. No power. The power is on, but No disc is inserted. No tape is inserted. the DVD+VCR does not work. - Page 37 Troubleshooting (Continued) Cause Symptom Some channels are The skipped channels were deleted with skipped over when the CH. ADD/DEL option. using CH/TRK (v/V) Picture and sound of Antenna or cables are loose. broadcasting channel are weak or missing. Wrong TUNING BAND option is being used.
-
Page 38: Language Code List
Language Code List Enter the appropriate code number for the “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” settings (see page 19). Language Code Language Abkhazian 6566 Fiji Afar 6565 Finnish Afrikaans 6570 French Albanian 8381 Frisian Amharic 6577 Galician Arabic 6582 Georgian Armenian... -
Page 39: Country Code List
Country Code List Enter the appropriate code number for the “Country Code” setting (see page 21). Code Country Code Country Andorra Eritrea United Arab Emirates Spain Afghanistan Ethiopia Antigua and Barbuda Finland Anguilla Fiji Albania Falkland Islands Armenia Micronesia Netherlands Antilles Faroe Islands Angola France... -
Page 40: Specifications
Specifications General Power requirements Power consumption Dimensions (approx.) Weight (approx.) Operating temperature Operating humidity Signal system Inputs ANTENNA IN VHS VIDEO IN(LINE1, 2) VHS AUDIO IN(LINE1, 2) Outputs VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT (PROGRESSIVE SCAN) Audio output (digital audio) Audio output (optical audio) Audio output (analog audio) RF OUT... -
Page 41: Notes
Notes... - Page 42 Notes...
-
Page 43: Notes
Notes... -
Page 44: Limited Warranty
This warranty covers internal operating parts and service/labor to repair or replace covered parts in this GoVideo product for 90 days labor, 1 year parts, from the date of purchase, defined as follows: (1) Original Consumer Retail Purchase; (2) First Rental Purchase Agreement; or (3) First Lease Purchase Agreement (the “Warranty Period”).