Figure 25: Wps-Wireless Configuration Completed; Figure 26: Add Device - SMC Networks BARRICADE N SMCWBR14-N5 User Manual

Figure 25: WPS-Wireless Configuration Completed

B PIN
Y
If the new device supports Wi-Fi Protected Setup and the PIN method, you
can add it to the network by PIN with the following two methods.
Method One: Enter the PIN into my Router.
Keep the default WPS Status as Enabled and click the "Add device"
1.
button in Figure 26, then the following screen will appear.

Figure 26: Add Device

Select "Enter the new device's PIN" and enter the PIN code of the
2.
wireless adapter in the field after PIN, as shown in the figure above.
Then click Connect.
The PIN code of the adapter is always displayed on the WPS
N :
OTE
configuration screen.
– 46 –
| Configuring the Router
C 4
HAPTER
WPS