SMC Networks BARRICADE N SMCWBR14-N5 User Manual page 67

To Add a Wireless MAC Address filtering entry, click the "Add New" button.
The "Add or Modify Wireless MAC Address Filtering entry" page will appear,
as shown in Figure 48:
Figure 48: Add or Modify Wireless MAC Address Filtering Entry
To add or modify a MAC Address Filtering entry, follow these instructions:
Enter the appropriate MAC Address into the MAC Address field. The
1.
format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any
hexadecimal digit). For example: 00-0A-EB-00-07-8A.
Provide a simple description of the wireless station in the Description
2.
field. For example: Wireless station A.
Select Enabled or Disabled for this entry on the Status pull-down list.
3.
Click the Save button to save this entry.
4.
To modify or delete an existing entry:
Click the Modify in the entry you want to modify. If you want to delete
1.
the entry, click the Delete button.
Modify the information.
2.
Click the Save button.
3.
Click the Enable All button to make all entries enabled.
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page.
Click the Previous button to return to the previous page.
For example: If you want wireless station A (MAC address 00-0A-EB-00-
07-8A) and wireless station B (MAC address 00-0A-EB-00-23-11) to be
able to access the Router, but not all the other wireless stations, you can
configure the Wireless MAC Address Filtering list as follows:
– 67 –
| Configuring the Router
C 4
HAPTER
Wireless