Figure 92: Find IP & MAC Binding Entry
Click the "Enable All" button to make all entries enabled.
Click the "Delete All" button to delete all entries.
Select IP & MAC Binding->ARP List from the menu; you can view and
ARP L
IST
set ARP List in the screen, as shown in
you could observe the computers in the LAN by checking the relationship of
MAC address and IP address on the ARP list, and you could configure the
items on the ARP list also. This page displays the ARP List; it shows all the
existing IP & MAC Binding entries as shown below.
Figure 93: ARP List
MAC Address - The MAC address of the controlled computer in the
◆
LAN.
IP Address - The assigned IP address of the controlled computer in
◆
the LAN.
Status - Indicates whether or not the MAC and IP addresses are
◆
bound.
◆
Configure - Load or delete an item.
l Load - Load the item to the IP & MAC Binding list.
●
l Delete - Delete the item.
●
Click the Bind All button to bind all the current items, available after
enable.
C
HAPTER
Figure
– 102 –
| Configuring the Router
4
IP & MAC Binding
93. To manage the computer,