SMC Networks BARRICADE N SMCWBR14-N5 User Manual page 61

Figure 40: Wireless Settings
Wireless Network Name - Enter a value of up to 32 characters. The
◆
same SSID (Service Set Identification) must be assigned to all wireless
devices in your network. The default SSID is set to be "SMC". This value
is case-sensitive. For example, "TEST" is NOT the same as "test".
◆ SSID (2-4) - Up to four SSIDs for each BSS can be set, the names can
be up to 32 characters. The multi-SSID function is available only when
Enable is checked.
Region - Select your region from the pull-down list. This field specifies
◆
the region where the wireless function of the Router can be used. It
may be illegal to use the wireless function of the Router in a region
other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for
assistance.
When you select your local region from the pull-down list, click the
Save button, then the Note Dialog appears. Click OK.
Figure 41: Note Dialog
– 61 –
| Configuring the Router
C 4
HAPTER
Wireless