Figure 33: WAN-PPPoE
User Name/Password - Enter the User Name and Password provided
◆
by your ISP. These fields are case-sensitive.
Secondary Connection - It is available only for PPPoE Connection. If
◆
your ISP provides an extra Connection type such as Dynamic/Static IP
to connect to a local area network, then you can check the radio button
of Dynamic/Static IP to activate this secondary connection.
Disabled - The Secondary Connection is disabled by default, so
■
there is PPPoE connection only. This is recommended.
Dynamic IP - You can check this radio button to use Dynamic IP as
■
the secondary connection to connect to the local area network
provided by ISP.
Static IP - You can check this radio button to use Static IP as the
■
secondary connection to connect to the local area network provided
by ISP.
– 52 –
| Configuring the Router
C
4
HAPTER
Network