Advanced Routing - SMC Networks BARRICADE N SMCWBR14-N5 User Manual

A R
DVANCED OUTING
In Time field, enter 1800 in Start Time field and 2000 in Stop Time
4.
field.
Click Save to complete the settings.
5.
Then you will go back to the Schedule Settings page and see the following
list.
Select static routing list from the menu; you can configure the static
route in the next screen
path that network information must travel to reach a specific host or
network.
Figure 84: Static Routing
To add static routing entries:
Click Add New.
1.
Figure 85: Add or Modify a Static Route Entry
Enter the following data:
2.
Destination IP Address - The Destination IP Address is the address
◆
of the network or host that you want to assign to a static route.
– 97 –
C
HAPTER
(Figure 84). A static route is a pre-determined
| Configuring the Router
4

Advanced Routing