Figure 8: Quick Setup; Figure 9: Choose The Wan Connection Type - SMC Networks BARRICADE N SMCWBR14-N5 User Manual

Figure 8: Quick Setup

Click Next. The WAN Connection Type page will appear, as shown in
3.
Figure 9.

Figure 9: Choose the WAN Connection Type

The Router provides an auto-detect function and supports three popular
ways (PPPoE, Dynamic IP, and Static IP) to connect to the Internet. It is
recommended that you make use of the auto-detect function. If you are
sure of what kind of connection type your ISP provides, you can select the
type and click Next to go on configuring.
If you select auto-detect, the Router will automatically detect the
4.
connection type your ISP provides. Make sure the cable is securely
plugged into the WAN port before detection. The appropriate
configuration page will be displayed when an active Internet service is
successfully detected by the Router.
If the connection type detected is PPPoE, the screen shown in
a.
Figure 10 will display.
– 34 –
| Quick Installation Guide
C 3
HAPTER
Quick Installation Guide