SMC Networks BARRICADE N SMCWBR14-N5 User Manual page 101

MAC Address - The MAC address of the controlled computer in the
◆
LAN.
IP Address - The assigned IP address of the controlled computer in
◆
the LAN.
Bind - Check this option to enable ARP binding for a specific device.
◆
Modify - To modify or delete an existing entry.
◆
When you want to add or modify an IP & MAC Binding entry, you can click
the "Add New" button or "Modify" button, and then you will go to the next
page. This page is used for adding or modifying an IP & MAC Binding entry
(as shown in Figure 91).
Figure 91: IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries, follow the steps below.
Click the Add New... button as shown in
1.
Enter the MAC Address and IP Address.
2.
Select the Bind checkbox.
3.
Click the Save button to save it.
4.
To modify or delete an existing entry, follow the steps below.
Find the desired entry in the table.
1.
Click Modify or Delete in the Modify column.
2.
To find an existing entry, follow the steps below.
Click the Find button as shown in
1.
Enter the MAC Address or IP Address.
2.
Click the Find button in the page as shown in
3.
– 101 –
| Configuring the Router
C 4
HAPTER
IP & MAC Binding
Figure 90.
Figure 92.
Figure 92.