Setting Up; Installation Mode; Parts For Ceiling Mount (Optional) - Panasonic PT-DW830E Operating Instructions (Functional Manual)

Hide thumbs Also See for PT-DW830E:
Table of Contents

Advertisement

Setting up

Installation mode

There are six ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 108) depending on
the installation method. Set [COOLING CONDITION] to [AUTO]. Using the projector with [COOLING CONDITION] set incorrectly may shorten
the life of the lamp.
Mounting on the ceiling and projecting forward
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Portrait setting and projecting from the rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
*1 For the portrait setting, use the optional Replacement lamp unit (for portrait mode) (Model No.: ET-LAD120P (1 pc), ET-LAD120PW (2 pcs)).
*2 Using the optional Replacement lamp unit (for portrait mode) (Model No.: ET-LAD120P (1 pc), ET-LAD120PW (2 pcs)) will set the cooling condition
to [PORTRAIT SETTING].
Note
f In the portrait setting, the on-screen menu is displayed sideways.

Parts for ceiling mount (optional)

You can install the projector on the ceiling using the optional Ceiling Mount Bracket (Model No.: ET-PKD120H (for high ceilings), ET-PKD120S
(for low ceilings), and ET-PKD120B (Projector Mount Bracket)).
f Be sure to use the Ceiling Mount Bracket specified for this projector.
f Refer to the Installation Instructions supplied with the Ceiling Mount Bracket when installing the projector with the bracket.
32 - ENGLISH
Chapter 2 Getting Started — Setting up
Method
[FRONT/CEILING]
[AUTO]
Method
[REAR/CEILING]
[AUTO]
*1
Method
[REAR/FLOOR]
[PORTRAIT SETTING]
*2
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Setting on a desk/floor and projecting forward
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Portrait setting and projecting forward
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Method
[REAR/FLOOR]
[AUTO]
Method
[FRONT/FLOOR]
[AUTO]
*1
Method
[FRONT/FLOOR]
[PORTRAIT SETTING]
*2

Advertisement

Table of Contents
loading

Table of Contents