Table of Contents
Advertisement
[SIGNAL FREQUENCY]
[PROJECTOR RUNTIME]
[LAMP1]
*3
[LAMP2]
*3
[INTAKE AIR TEMP.]
[OPTICS MODULE TEMP.]
[AROUND LAMP TEMP.]
[PROJECTOR TYPE]
[SERIAL NUMBER]
[LAMP UNIT MODEL NO.]
[LAMP1 SERIAL NUMBER]
[LAMP2 SERIAL NUMBER]
[MAIN VERSION]
[SUB VERSION]
[UPGRADE(ET-UK20)]
[ON COUNT]
[LAMP1]
[LAMP2]
[NUMBER OF REGISTERED
SIGNAL]
[REMOTE2 STATUS]
[AC VOLTAGE]
[COOLING CONDITION]
[SIGNAL INFORMATION]
*1 Only for PT-DZ870E
*2 The temperature status is displayed with text color (green/yellow/red) and bar scale. Use the projector within the indication in green.
*3 The lamp runtime to be displayed is real time. The following conversion is required to calculate the rough estimate for lamp replacement.
(A x 4 + B x 3) ÷ 4
f A: Runtime when [LAMP POWER] is set to [NORMAL]
f B: Runtime when [LAMP POWER] is set to [ECO]
The formula when the optional Replacement lamp unit (for portrait mode) is used is:
(A x 13 + B x 10) ÷ 13
Note
f The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the [STATUS] screen.
f Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.
[NO SIGNAL SHUT-OFF]
A function that automatically switches the power source of the projector to standby if there is no input signal for a certain period of time. The
time before switching to standby can be set.
1)
Press as to select [NO SIGNAL SHUT-OFF].
120 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Displays the frequency of the input signal.
Displays the operation times of the projector.
Displays the runtime and status of Lamp 1.
Displays the runtime and status of Lamp 2.
Displays the status of the air intake temperature of the projector.
*2
Displays the status of the internal temperature of the projector.
*2
Displays the status of the temperature around the lamps of the projector.
*2
Displays the type of the projector.
Displays the serial number of the projector.
Displays the model no. of the lamp unit.
Displays the serial number of the lamp 1.
Displays the serial number of the lamp 2.
Displays the main version of the firmware of the projector.
Displays the sub version of the firmware of the projector.
Displays the activation status based on the Upgrade Kit.
*1
[POWER ON TIMES]
[LAMP1 ON]
[LAMP2 ON]
[SHUTTER]
Displays runtime in detail.
Displays runtime in detail.
Displays the number of registered signals.
Displays the control status of the REMOTE2.
Displays the status of the AC voltage.
Displays the set cooling conditions. When [AUTO] is set, automatically recognized result is displayed.
[MEMORY NO.]
[INPUT]
[SIGNAL NAME]
[SIGNAL FREQUENCY]
[SYNC.STATE]
[V.SYNC WIDTH]
[SCAN TYPE]
[TOTAL DOTS]
[DISPLAY DOTS]
[TOTAL LINES]
[DISPLAY LINES]
[SAMPLING]
[SIGNAL LEVEL]
[BIT DEPTH]
*1
Formula for lamp replacement time (rough estimate)
Displays the number of times the power is turned on.
Displays the number of times the lamp is turned on.
Displays the number of times the shutter is closed.
Displays the memory number of the input signal.
Displays the input terminal currently selected.
Displays the input signal name.
Displays the frequency of the input signal.
Displays the synch polarity of the input signal.
Displays the vertical sync signal pulse width of the input signal.
Displays the scan type of the input signal.
Displays the total dot count of the input signal.
Displays the number of input signal display dots.
Displays the total line count of the input signal.
Displays the number of input signal display lines.
Displays the sampling information of the input signal.
Displays the signal level of the input signal.
Displays the gradation of the input signal.
Advertisement
Table of Contents
