Table of Contents
Advertisement
Channel
Control details
8
Fade-in time setting
9
Fade-out time setting
10
Custom masking
11
Geometry
Note
f If the projector is operated with the remote control or on the control panel, or by the control command while controlling the projector by
using the Art-Net function, the setting of the DMX controller and the computer application may be different from the projector status. In that
case, set the "Lock" setting of the channel 7 to "Operation not available" and then reset to "Operation available". The controls of all channels
become reflected to the projector.
Chapter 6 Appendix — Technical information
Performance
0.0s
0.5s
1.0s
1.5s
2.0s
2.5s
3.0s
3.5s
4.0s
5.0s
7.0s
10.0s
No operation
0.0s
0.5s
1.0s
1.5s
2.0s
2.5s
3.0s
3.5s
4.0s
5.0s
7.0s
10.0s
No operation
OFF
PC-1
PC-2
PC-3
No operation
OFF
KEYSTONE
CURVED
PC-1
PC-2
PC-3
CORNER CORRECTION
No operation
Parameter
0-15
16-31
32-47
48-63
64-79
80-95
Operate together with channel 1.
96-111
112-127
128-143
144-159
160-175
176-191
192-255
0-15
16-31
32-47
48-63
64-79
80-95
Operate together with channel 1.
96-111
112-127
128-143
144-159
160-175
176-191
192-255
0-31
32-63
To use this function, the optional
64-95
Upgrade Kit (Model No.: ET-UK20) is
required.
96-127
128-255
0-15
16-31
32-47
(Only for PT-DZ870E)
48-63
To use PC-1, PC-2, or PC-3, the
optional Upgrade Kit (Model No.:
64-79
ET-UK20) is required.
80-95
96-111
112-255
ENGLISH - 169
Remark
Advertisement
Table of Contents
