Table of Contents
Advertisement
Chapter 2: WEB Configuration
4. Diagnostics
This page offers basic diagnostic tools for you to utilize when connectivity problems occur. When you
ping an Internet device, you send a packet to its TCP/IP stack, and it sends one back to yours. To use the
ping Test, enter the information needed and press Start Test; the Result will be displayed in the lower part
of the window. Press Abort Test to stop, and Clear Results to clear the result contents.
Note: Firewalls may cause pings to fail but still provide you TCP/IP access to selected devices behind
them. Keep this in mind when pinging a device that may be behind a firewall. Ping is most useful to verify
connectivity with PCs have no firewall, such as the PCs on your LAN side.
Fig. 9
19
Illustrations contained in this document are for representation only.
Advertisement
Table of Contents
