Frequency/Voltage Control - Gigabyte GA-7VA User Manual

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
Spread spectrum Modulated
CPU Host Clock Control
øCPU Host Frequency(MHz)
øPCI/AGP Frequency(MHz)
DRAM Clock(MHz)
CPU OverVoltage Control
AGP OverVoltage Control
DIMM OverVoltage Control
higf: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
øThose items will be available when "CPU Host Clock Control" is set to Enabled.
FSpread spectrum Modulated
8Auto
Set clock spread spectrum by auto.
8Disabled
Disable clock spread spectrum.
8Enabled
Enable clock spread spectrum.(Default value)
FCPU Host Clock Control
Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When
time out occur, system will reset and run at CPU default Host clock at next boot.
8Disable
Disable CPU Host Clock Control.(Default value)
8Enable
Enable CPU Host Clock Control.
FCPU Host Frequency (MHz) (By switch SW1)
8100
Set CPU Host Clock to 100MHz~132MHz.
8133
Set CPU Host Clock to 133MHz~165MHz.
8166
Set CPU Host Clock to 166MHz~200MHz.
Frequency/Voltage Control
[Auto]
[Disable]
100
33/66
[Auto]
[Auto]
[Auto]
[Auto]
Figure 8: Frequency/Voltage Control
- 47 -
Item Help
Menu Levelu
BIOS Setup