D Adding Toner - Gestetner DSc224 Tool Reference

Gestetner dsc224: user guide
Hide thumbs Also See for DSc224:
Table of Contents

Advertisement

D Adding Toner

D
D
D
When D is displayed, it is time to add toner.
R WARNING:
• Do not incinerate used toner or toner containers. Toner dust might ig-
nite when exposed to an open flame. Dispose of used toner containers
in accordance with local regulations.
R CAUTION:
• Keep toner (used or unused) and toner containers out of reach of children.
Important
❒ If you use toner other than that recommended, an error might occur.
❒ When adding toner, do not turn off the operation switch.
❒ Always add toner after the machine instructs you.
❒ Do not install and remove the toner cartridges over and over. This could re-
sult in a toner leak.
❒ Do not shake the removed toner cartridge. The remaining toner might scatter.
Note
❒ You can still make about 50 copies after the messages "D Toner is almost
empty.", "Replace Toner Cartridge(s).", and "Black, Yellow, Magenta, Cyan"
appear cyclically, but replace toner early to prevent poor copy quality.
❒ Change all four color-toner cartridges in the same way.
❒ If "Toner Cartridge is not set properly." appears, slide the toner cartridge
back and forth twice, and push it until it stops.
❒ The consumption of toner depends on the humidity, temperature and print-
ing factors such as image size, density, number of prints, paper size, and pa-
per type. Moreover, to preserve print quality, this machine automatically
performs periodic maintenance using the toner.
Reference
Regarding toner storage, ⇒ p.139 "Toner Storage".
D Adding Toner
6
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsc232

Table of Contents