Gestetner DSc224 Tool Reference page 96

Specification
❒ When you use the bypass tray, it is recommended to set the copy paper direc-
tion to L.
❒ When you load the OHP transparencies, check the front and back of the
sheets, and place them correctly, or a misfeed might occur. When using OHP
transparencies with a taped edge, set them so the taped edge is fed last. Set
the paper direction to K and select A4K, 8
"Tray Paper Size: (Tray 1–4)", "Copying from the Bypass Tray" in Copy Ref-
erence.
❒ When you use OHP transparencies, shuffle them for each use. If you store the
sheets in the tray, they may adhere and may cause feeding problems.
❒ If multiple-sheet jams occur, load the paper sheet by sheet.
❒ Envelopes should be fed using the bypass tray.
❖ ❖ ❖ ❖ When copying onto envelopes
• Be sure to set the size of the envelope before copying. For details, see
"When Copying onto Envelopes" in the Copy Reference.
• If you are printing onto the envelope from the printer driver, set the size
of the envelope from the printer driver.
• When you are copying or printing on envelopes, select "Thick Paper"
for the paper type.
• The minimum vertical length of envelopes that can be loaded is 140
mm, including opened flap.
• Do not print on both sides.
• Do not stack more than 10 envelopes in the output tray.
8
• Do not use double-flapped envelopes.
• Do not use envelopes with released tabs attached to the sealed part.
• Some kinds of envelopes might wrinkle or the print quality may be af-
fected, especially on overlaps.
• Load envelopes bottom side first and flaps open.
• Before loading envelopes, flatten opened flaps.
❒ If you load paper of the same size in the same direction in two or more trays,
the machine automatically shifts to the other tray when the first tray in use
runs out of paper. This function is called Auto Tray Switching. (However, if
one tray has recycled or special paper, the settings of the other trays must be
the same for Auto Tray Switching.) This saves interrupting a copy run to re-
plenish paper when making a large number of copies.
❒ The paper types you can select in System Settings are only general classifica-
tions. The copy quality for every kind of paper in a classification is not guar-
anteed. See ⇒ p.163 "Non-recommended Paper" for more information.
162
"×11"K as paper size, ⇒ p.76
1
/
2