Recalling A Program - Gestetner CP6143L Operating Instructions Manual

C2678608_Platinum-EN.book Page 61 Sunday, February 12, 2006 10:53 PM
D
Use the {U}{T} keys to select a
number.
Note
❒ If the number is already in use,
a message will be displayed
asking whether you wish to
overwrite the settings stored. To
overwrite, press the {OK} key.
Otherwise press the {Escape}
key to return to the previous
display, and then select another
number.
E
Press the {OK} key.

Recalling a Program

A
Press the {Program} key.
B
Use the {U}{T} keys to select Re-
call, and then press the {OK} key.
C
Use the {U}{T} keys to select the
number to recall, and then press
the {OK} key.
The stored settings are displayed.
D
Confirm that the settings are cor-
rect, and then set your original.
E
Press the {Start} key.
ANT120S
Program
3
ANT128S
61