Gestetner CP6143L Operating Instructions Manual page 58

C2678608_Platinum-EN.book Page 52 Sunday, February 12, 2006 10:53 PM
Printing Functions
F
With the number keys, enter the
number of classes, and then press
the {q} key.
Note
3
❒ Repeat Steps
all your classes.
G
Press the {OK} key.
H
Press the {Clear Modes/Energy Sav-
er} key.
The contents that you have stored
are now effective.
Recalling the Stored Settings
A
Set your original.
B
Press the {Memory/Class} key.
C
Use the {U}{T} keys to select Re-
call Program, and then press the
{OK} key.
52
D F
to to register
ANT139S
D
Use the {U}{T} keys to select
Class or Memory, and then press
the {OK} key.
E
Use the {U}{T} keys to select the
number to recall, and then press
the {OK} key.
F
Confirm that the settings are cor-
rect, and then press the {OK} key.
Note
❒ To change the stored settings, use
the {U}{T} keys to select the
item that you wish to change, and
then overwrite using the number
keys.
G
Press the {Start} key.
ANT128S