Placing A New Roll Of Tape In The Tape Dispenser (Option) - Gestetner CP6143L Operating Instructions Manual

C2678608_Platinum-EN.book Page 77 Sunday, February 12, 2006 10:53 PM
Placing a New Roll of Tape in the Tape
Dispenser (Option)
Note
❒ Make sure that the main switch is
turned on and the power switch of
the tape dispenser is off.
A
Open the cover of the tape dispens-
er.
B
As shown, put the roll in the dis-
penser.
Note
❒ Make sure that the tape is in-
stalled in the proper direction. If
it is not in the correct direction,
the tape dispenser will not work
correctly.

Placing a New Roll of Tape in the Tape Dispenser (Option)

C
Feed the leading edge of the roll in
the dispensing slot until it stops.
Note
❒ Push the tape as far as possible
through the slot.
TSLP010E
D
Turn on the power switch of the
tape dispenser.
O n
O f f
TSLP011E
E
Press the manual cut button to trim
off the leading edge of the tape.
4
TSLP012E
TSLP013E
TSLP014E
77